Menu Close
10 Pound Cans of Stick Electrode

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/4 x 18 in (6.4 x 450 mm) ED030880
1/8 x 14 in (3.2 x 350 mm) ED032597 ED030877
3/16 x 14 in (4.8 x 350 mm) ED030879
3/32 x 14 in (2.4 x 350 mm) ED032596 ED030876
5/32 x 14 in (4.0 x 350 mm) ED030878

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

Stick (SMAW) | ED032596

AWS:
E8018-C1

Low Alloy, Low Hydrogen • AWS E8018-C1 H4R

Diameter

Select Diameter

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Buy Now

DETAILS

Low alloy electrode designed for low temperature applications

Features

  • Designed to produce a nominal 2.25% nickel deposit
  • Premium arc performance
  • Easy strike, re-strike and slag removal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030877
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030878
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030879
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C1 MR® Stick (SMAW) Electrode

ED030880
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8018-C1 H4R
CWB CSA W48 E5518-C1-H4

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F) 		Hardness Rockwell B
E8018-C1 H4R Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, 1 hour @ 605°C (1125°F) 460-560 (67-81) 560-660 (82-96) 23-30 50-138 (37-102) 88-94

DEPOSIT COMPOSITION

Classification %C %Mn %Ni %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E8018-C1 H4R Requirement 0.12 max. 1.25 max. 2.00 - 2.75 0.03 max. 0.03 max. 0.80 max. 4 max. 0.2 max. 0.4 max.
Typical Result 0.05-0.11 0.92-1.22 2.04-2.35 0.01-0.02 0.01 max. 0.23-0.38 1-4 0.2 max. 0.1-0.4

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 70-110
3/32 in (2.4 mm) AC 80-120
1/8 in (3.2 mm) DC+ 90-160
1/8 in (3.2 mm) AC 100-160
5/32 in (4.0 mm) DC+ 130-210
5/32 in (4.0 mm) AC 140-210
3/16 in (4.8 mm) DC+ 180-300
3/16 in (4.8 mm) AC 200-300
7/32 in (5.6 mm) DC+ 250-330
7/32 in (5.6 mm) AC 270-370
1/4 in (6.4 mm) DC+ 300-400
1/4 in (6.4 mm) AC 325-430

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.