Menu Close
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Diameters / Packaging

Diameters
 (4) 14 lb Coil
 10 lb Spool
 25 lb Spool
 50 lb Coil
 500 lb Accu-Trak® Drum
0.030 in (0.8 mm) ED033130
0.035 in (0.9 mm) ED016354 ED030637
0.045 in (1.1 mm) ED016363 ED030638 ED029028
0.068 in (1.7 mm) ED012506 ED030641 ED012507
3/32 in (2.4 mm) ED013869
5/64 in (2.0 mm) ED012508 ED030645 ED012509

Innershield® NR®-211-MP Flux-Cored (FCAW-S) Wire

Flux-Cored Self-Shielded (FCAW-S) | ED029028

AWS:
E71T-11
E71T11-AZ-CS3

Innershield® NR-211®-MP from Lincoln Electric is a versatile wire suitable for all-position welding of light gauge or thin plate.

Diameter

Select Diameter

  • 0.030 in (0.8 mm)
  • 0.035 in (0.9 mm)
  • 0.045 in (1.1 mm)
  • 0.068 in (1.7 mm)
  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 10 lb Spool
  • 25 lb Spool
  • 500 lb Accu-Trak® Drum
Buy Now

DETAILS

A versatile wire suitable for all-position welding of light gauge or thin plate. Recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 in) to 12.7 mm (1/2 in).

Features

  • Versatile welding capability on a variety of base materials
  • High operator appeal and good bead appearance
  • Easy slag removal
  • Fast freezing characteristics accommodate poor fit-up

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

Innershield, Outershield, 10 lb. or 12.5 lb plastic spool

Innershield® NR® -211-MP

ED016354
Innershield, Outershield, 10 lb. or 12.5 lb plastic spool

Innershield® NR® -211-MP

ED016363
Innershield, Outershield, 10 lb. or 12.5 lb plastic spool

Outershield® 71M Flux-cored (FCAW-G) Wire

ED026804
2 lb Spool SuperArc L-56 MIG Wire

SuperArc® L-56® MIG (GMAW) Wire

ED030632
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z NO 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E71T-11 Requirement DC- 400 (58) min. 480-660 (70-95) 20 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T-11 Requirement DC- 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16-17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
.045" (1.1 mm) DC- 13 (1/2) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
.045" (1.1 mm) DC- 13 (1/2) 2.3 (90) 16-17 140 1.0 (2.2) 0.8 (1.7) 77
.045" (1.1 mm) DC- 13 (1/2) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
.045" (1.1 mm) DC- 13 (1/2) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88