Menu Close
Lincoln Stainless Cut Length TIG Electrode

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/16 in (1.6 mm) ED035247
3/32 in (2.4 mm) ED035248

Lincoln® ER410NiMo TIG (GTAW) Cut Lengths

TIG (GTAW) | ED035248

AWS:
AWS ER410NiMo

LINCOLN® ER410NiMo Tungsten Inert Gas Rod designed for use to overlay mild and low alloy steels.

Diameter

Select Diameter

  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Package

Select Package

  • 10 lb (4.5 kg) Plastic Tube
Buy Now

DETAILS

LINCOLN® ER410NiMo provides high nickel-molybdenum weld deposits for overlay on mild and low alloy steels.

Features

  • Used to overlay mild and low alloy steels
  • Preheat and inter-pass temperatures of 300°F (150°C) or greater is recommended during welding
  • Post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® - Certificate showing actual wire composition

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER410NiMo

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si
ER410NiMo Requirement 0.06 max. 11.0 - 12.5 0.75 max. 0.6 max. 0.4 - 0.7 Info. Only Info. Only 4.0 - 5.0 0.03 max. 0.03 max. 0.5 max.
Typical Result 0.02-0.03 11.8-12.1 0.04-0.06 0.4-0.5 0.5-0.6 0.02-0.05 0.00 max. 4.5-4.7 0.01-0.02 0.01 max. 0.4