DETAILS
- A low carbon, high manganese, very high silicon wire
- Can be used with Lincolnweld® 800 series fluxes for welds requiring 480 MPa (70 ksi) tensile strength in stress relieved conditions
Features
- A low carbon, medium manganese, high silicon, nickel-bearing electrode designed for use with Lincolnweld® neutral fluxes
- Suitable for use in applications requiring less than 1% Ni wire composition
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.17 | EH11K |
| AWS | AWS A5.23 | EH11K |
| ISO | ISO 14171-B | SU31 |
| MIL | MIL-E-23765/1D | MIL-70S-6 |
| MIL | MIL-E-23765/1E | MIL-70S-6 |
WIRE COMPOSITION
| Classification | %C | %Mn | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|
| EH11K Requirement | 0.06 - 0.15 | 1.40 - 1.85 | 0.030 max. | 0.030 max. | 0.80 - 1.15 | 0.35 max. |
| SU31 Requirement | 0.06 - 0.15 | 1.40 - 1.85 | 0.030 max. | 0.030 max. | 0.80 - 1.15 | 0.40 max. |
| Typical Result | 0.10 | 1.65 | 0.014 | 0.000 | 0.85 | 0.10 |