50lb Coil Ultracore 70C

Diameters / Packaging

Diameters
50 lb (22.7kg) Coil
600 lb (272 kg) Speed-Feed® Drum
1/8 in (3.2 mm) ED015262 ED015268
3/32 in (2.4 mm) ED015260 ED015261
5/32 in (4.0 mm) ED015264

Lincore® 420 Metal-Cored Submerged Arc (SAW) Wire

Metal-Cored Submerged Arc (SAW) | ED015262

Lincore® 420 Metal-Cored Submerged Arc Wire is designed for regeneration of caster rolls applications ( Metal to Metal)

DETAILS

LINCORE® 420 provides martensitic stainless steel weld metal, offers chromium chemical composition to be used with recommended Lincoln weld® 801 and Lincoln weld 802 standard flux for semiautomatic operations.

Features

  • Metal-cored wire that is most widely used for caster roll rebuilding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 46-50

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Si
Lincolnweld® 801® Typical Result 0.20 12.0 1.2 0.5

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
3/32 in (2.4 mm) DC+ 1.7 (65) 24 250
3/32 in (2.4 mm) DC+ 3.0 (120) 28 375
3/32 in (2.4 mm) DC+ 4.4 (175) 31 450
1/8 in (3.2 mm) DC+ 1.5 (60) 26 350
1/8 in (3.2 mm) DC+ 2.5 (100) 28 500
1/8 in (3.2 mm) DC+ 3.6 (140) 30 625
5/32 in (4.0 mm) DC+ 1.4 (55) 27 475
5/32 in (4.0 mm) DC+ 2.2 (85) 30 650
5/32 in (4.0 mm) DC+ 2.9 (115) 32 800