Menu Close
Lincoln Electric MIG Wire

Diameters / Packaging

Diameters
 10 lb Spool
 33 lb Spool
1.0 mm (0.040 in) ED033119
1.2 mm (0.047 in) ED033122 ED033120

Pipeliner® 80Ni1 MIG (GMAW) Wire

MIG (GMAW) | ED033120

AWS:
ER80S-G

Pipeliner® 80Ni1 from Lincoln Electric is a micro-alloyed MIG wire designed for semi-automatic or automatic welding of root, hot, fill and cap passes.

Diameter

Select Diameter

  • 1.0 mm (0.040 in)
  • 1.2 mm (0.047 in)

Package

Select Package

  • 10 lb Spool
  • 33 lb Spool
Buy Now

DETAILS

This micro-alloyed MIG wire is designed for semi-automatic or automatic welding of root, hot, fill and cap passes on up to X80 grade pipe and root passes on up to X100 grade pipe.

Features

  • Root pass capability up to X100 and hot, fill and cap pass up to X80 grade pipe
  • Impact toughness capable of exceeding 69 - 95 J (51 - 70 ft·lbf) at -50°C (-58°F)
  • Q2 Lot® - Certificate showing actual deposit chemistry available online
  • Excellent wire placement for narrow groove welding
  • ProTech® packaging system

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
14lb Coil Innershield NR-207 Hermetically Sealed Pail

Innershield® NR®-208-H Flux-Cored (FCAW-S) Wire

ED023366
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Generic 8lb can

Excalibur® 11018M MR® Stick (SMAW) Electrode

ED032607
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.28 ER80S-G
ABS ABS - Part 2 5YQ500SA H10
CWB AWS A5.28 ER80S-G
DNV-GL DNV - 2.9 V Y50MS H5
LR LR - Chapter 11 5Y50S H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F) 		Hardness Rockwell B
ER80S-G Requirement Not Specified DC+ 550 (80) min. Info. Only
Typical Result, As-welded 80% Ar, 20% CO2 DC+ 510-600 (74-87) 620-670 (90-97) 25-27 92-142 (68-105) 68-100 (50-74) 91-95

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %C %Cr %Cu %Mn %Mo %Ni %P %S %Si %Ti %V %Zr
Typical Result 80% Ar, 20% CO2 DC+ 0.06-0.09 0.03-0.05 0.16-0.20 1.27-1.32 0.02 max. 0.75-0.87 0.005-0.009 0.005-0.009 0.56-0.65 0.03 0.005 max. 0.001 max.

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Ti+Zr %Total Cu
ER80S-G Requirement 0.30 min. * 0.20 min. * 0.50 min. *
Typical Result 0.01 max. 0.06-0.08 0.04 1.46-1.57 0.01 max. 0.84-0.92 0.005-0.010 0.005-0.011 0.74-0.77 0.07 0.01 max. 0.001 max. 0.04-0.06 0.19-0.21

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the eletrode must meet the minimum requirement for one or more of