Menu Close
20 lb Plastic Spool SuperGlaze or SuperGlaze HD Aluminum MIG Wire

Diameters / Packaging

Diameters
 (20) 1 lb Spool
 2 KG SPOOL (S200)
 7 KG SPOOL (BS300)
 7.26 KG SPOOL (S300)
 16 lb Spool
 20 lb Spool
 20 LB SPOOL
 300 lb Gem-Pak® Box
0.8 mm ED701762
0.035 IN ED700145
0.035 in (0.9 mm) ED030312 ED028385 ED034722
1.0 mm ED703753 ED701763 ED702736
1.2 mm ED702755
1/16 in (1.6 mm) ED030283 ED034551
3/64 in (1.2 mm) ED030282 ED034550

SuperGlaze® 5356 MIG (GMAW) Wire

MIG (GMAW) | ED030282

AWS:
AWS A5.10 : ER5356

SuperGlaze® 5356 is very commonly used for higher strength welding of 5XXX and 6XXX base materials

Diameter

Select Diameter

  • 0.8 mm
  • 0.035 IN
  • 0.035 in (0.9 mm)
  • 1/16 in (1.6 mm)
  • 1.0 mm
  • 1.2 mm
  • 3/64 in (1.2 mm)

Package

Select Package

  • 20 lb Spool
  • 300 lb Gem-Pak® Box
Buy Now

DETAILS

SuperGlaze® 5356 Aluminum Magnesium alloy is very commonly used for higher strength welding of 5XXX and 6XXX base materials. Its higher columnar strength offers improved feeding.

Features

  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • Most widely used aluminum-magnesium welding alloy
  • High strength filler metal

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-22
Image not found

Magnum® Contact Tip - Aluminum, 3/64 in (1.2 mm) - 10/pack

KP14A-364
Drive Roll Kit, Aluminum Wire

Drive Roll Kit 3/64 in (1.2 mm) Aluminum Wire

KP1507-3/64A
SHADOW SPLIT LEATHER-SLEEVED JACKET

Shadow Split Leather Sleeved Welding Jacket - Large

K2986-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cr %Cu %Fe %Mn %Si %Ti
ER5356 Requirement 0.0003 max. 4.5 - 5.5 0.10 max. 0.05 - 0.20 0.10 max. 0.40 max. 0.05 - 0.20 0.25 max. 0.06 - 0.20
Typical Result 0.0002 max. 4.9 0.01 0.12 0.00 0.11 0.12 0.06 0.10

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535