Menu Close
25lb plastic spool Innershield NR-305

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED032217
1/16 in (1.6 mm) ED032216

UltraCore® 81Ni2A75-H Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED032217

AWS:
E81T1-Ni2M-JH4
E81T1-M21A6-Ni2-H4

UltraCore® 81Ni2A75-H from Lincoln Electric exhibits superior crack resistance due to low diffusible hydrogen levels (4 mL/100 grams of weld deposit max).

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 33 lb Spool
Buy Now

DETAILS

For high strength, low alloy applications where productivity and consistency are a must in 75% Argon/25% CO2 applications. The mixed shielding gas stabilizes arc characteristics, reduces spatter levels, and washes out of the weld bead for a flat appearance.

Features

  • Capable of producing weld deposits with impact toughness exceeding 88 - 123 J (65 - 91 ft·lbf) at -40°C (-40°F)
  • Designed for welding with 75-85% Argon/Balance CO2 shielding gas
  • Premium arc performance and bead appearance
  • Meets AWS D1.8 seismic lot waiver requirements
  • ProTech® foil bag packaging
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1C-H Flux-cored (FCAW-G) Wire

ED032204
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1A75-H Flux-cored (FCAW-G) Wire

ED032206
25lb plastic spool Innershield NR-305

UltraCore® 81Ni2A75-H Flux-cored (FCAW-G) Wire

ED032216
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni2M-JH4
AWS AWS A5.36 E81T1-M21A6-Ni2-H4
ABS ABS - Part 2 3YSA H5
CWB CSA W48 E551T1-M21A5-Ni2-H4 (E551T1-Ni2M-JH4)
DNV-GL DNV - 2.9 III Y40MS H5
LR LR - Chapter 11 3YS H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) 		Charpy V-Notch
J (ft-lbs) @ -60°C (-75°F)
E81T1-Ni2M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-M21A6-Ni2-H4 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 540 (78) 590-680 (85-98) 22 88-125 (65-92) 31-117 (23-87) 33-42 (24-31)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %Ni %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni2M-JH4 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4.0 max.
E81T1-M21A6-Ni2-H4 Requirement M21-ArC DC+ 0.12 max. 1.50 max. 1.75 - 2.75 0.030 max. 0.030 max. 0.80 max. 4 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.004-0.0061 0.04-0.05 0.91-1.06 2.00-2.34 0.014 max. 0.010 max. 0.25-0.33 1.3-4

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.4 (175) 21-26 140 1.8 (4.0) 1.6 (3.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.1 (200) 22-27 150 2.1 (4.6) 1.8 (4.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 22-27 165 2.6 (5.7) 2.3 (5.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.6 (300) 23-28 190 3.1 (6.8) 2.7 (6.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.9 (350) 24-29 205 3.6 (8.0) 3.2 (7.0) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 9.5 (375) 24-29 225 3.9 (8.6) 3.4 (7.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 10.8 (425) 25-30 245 4.4 (9.7) 3.8 (8.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 12.1 (475) 26-31 265 4.9 (10.8) 4.3 (9.5) 86-88
0.045 in (1.1 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 12.7 (500) 27-32 275 5.2 (11.4) 4.5 (10.0) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 3.8 (150) 21-26 150 2.0 (4.5) 1.8 (3.9) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.7 (185) 22-27 165 2.5 (5.5) 2.2 (4.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.7 (225) 22-27 190 3.1 (6.7) 2.7 (5.9) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 23-28 215 3.4 (7.5) 2.9 (6.5) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.0 (275) 23-28 235 3.7 (8.2) 3.2 (7.2) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.6 (300) 24-29 255 4.1 (9.0) 3.5 (7.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.5 (335) 24-30 275 4.5 (10.0) 4.0 (8.7) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 9.5 (375) 25-31 295 5.1 (11.2) 4.4 (9.8) 86-88
0.052 in (1.3 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 10.2 (400) 25-32 310 5.4 (12.0) 4.7 (10.4) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 3.8 (150) 21-27 200 2.9 (6.3) 2.5 (5.5) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 4.4 (175) 21-28 210 3.3 (7.4) 2.9 (6.4) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.1 (200) 22-29 235 3.8 (8.4) 3.3 (7.3) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 5.7 (225) 23-30 265 4.3 (9.5) 3.7 (8.2) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 6.4 (250) 24-31 285 4.8 (10.5) 4.2 (9.2) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 7.0 (275) 24-32 315 5.3 (11.6) 4.6 (10.1) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.3 (325) 24-32 335 6.2 (13.7) 5.4 (11.9) 86-88
1/16 in (1.6 mm) 75-85% Ar / balance CO2 DC+ 25 (1) 8.9 (350) 25-33 365 6.7 (14.7) 5.8 (12.8) 86-88

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.