Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED034994
3/32 x 12 in (2.4 x 300 mm) ED034993
5/32 x 14 in (4.0 x 350 mm) ED034995

Excalibur® 310-16 Stick (SMAW) Electrode

Stick (SMAW) | ED034995

CLASSIFICATIONS:
AWS A5.4 : E310-16

EXCALIBUR® 310-16 is a multiple purpose austenitic, heat resistant stainless, with minimal heat input required during welding and is used for high operating temperature stainless applications on welding 310/310s materials, Heat Shields, Furnace Parts and Ducting on all welding positions, except vertical down (Stainless)

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • 10 lb (4.5 kg) Easy Open Can

DETAILS

Features

  • Used for high operating temperature stainless applications
  • Multiple purpose austenitic, heat resistant stainless
  • Minimal heat input required during welding

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E310-16

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
E310-16 Requirement 550 (80) min. 30 min.
Typical Result, As-welded 580-630 (84-92) 40-41

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si
E310-16 Requirement 0.08 - 0.20 25.0 - 28.0 0.75 max. 1.0 - 2.5 0.75 max. 20.0 - 22.5 0.03 max. 0.03 max. 0.75 max.
Typical Result 0.10-0.12 26.3-26.6 0.03 2.0-2.1 0.08 20.9-21.7 0.02 0.00 0.56-0.63

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.