Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
 Can 22,7 kg
1/8 x 14 in (3.2 x 350 mm) ED032562
2.4 x 300 mm ED010211
3.2 x 350 mm ED010203
3/16 x 14 in (4.8 x 350 mm) ED010207
3/32 x 12 in (2.4 x 300 mm) ED032561
4.0x350 mm ED010216
7/32 x 18 in (5.6 x 450 mm) ED010219

Fleetweld® 5P® Stick Electrode (SMAW)

Stick (SMAW) | ED010219

CLASSIFICATIONS:
E6010

Mild Steel, Cellulosic • AWS E6010

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 2.4 x 300 mm
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 3.2 x 350 mm
  • 4.0x350 mm
  • 7/32 x 18 in (5.6 x 450 mm)

Package

Select Package

  • 50 lb Easy Open Can

DETAILS

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Features

  • Excellent vertical and overhead capability
  • Light slag with minimal arc interference
  • Deep arc penetration

Service Information

You May Also Need

Fleetweld 5P 14 Stick Electrode in 10 lb can"

Fleetweld® 5P® Stick Electrode (SMAW)

ED032561
Fleetweld 5P 14 Stick Electrode in 10 lb can"

Fleetweld® 5P® Stick Electrode (SMAW)

ED032562
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K704 Accessory Kit

Accessory set 400A

K704
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.