Menu Close
Stick Electrode 50 lb. Box

Diameters / Packaging

Diameters
 50 lb Carton
1/4 x 18 in (6.4 x 450 mm) ED010360
1/8 x 14 in (3.2 x 350 mm) ED010362
3/16 x 18 in (4.8 x 450 mm) ED010366
5/32 x 14 in (4.0 x 350 mm) ED010372
7/32 x 18 in (5.6 x 450 mm) ED010375

Jetweld® 1 Stick (SMAW) Electrode

Stick (SMAW) | ED010362

CLASSIFICATIONS:
E7024-1

Mild Steel, High Deposition • AWS E7024-1

Diameter

Select Diameter

  • 1/4 x 18 in (6.4 x 450 mm)
  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 18 in (4.8 x 450 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Package

Select Package

  • 50 lb Carton

DETAILS

High deposition stick electrode for large welds in flat or Slightly downhill (15° max) positions

Features

  • High deposition rates
  • Smooth bead appearance
  • Minimal spatter
  • Shallow penetration

Service Information

You May Also Need

Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010360
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010366
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010372
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010375
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7024-1
ISO ISO 2560-B E4924-1 A
ABS AWS A5.1 E7024-1
BV BV - Chapter 5 1
CWB CSA W48 E4924-1
DNV-GL DNV - 2.9 1
LR LR - Chapter 11 1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Hardness Rockwell B
E7024-1 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 450-530 (65-76) 520-610 (76-88) 22-30 27-80 (20-59) 82-93

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V
E7024-1 Requirement 0.15 max. 0.20 max. 1.25 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.90 max. 0.08 max. 1.50 max.
Typical Result 0.05-0.11 0.03-0.06 0.67-1.13 0.02 max. 0.01-0.05 0.012-0.022 0.004-0.011 0.25-0.54 0.02-0.03 0.79-1.25

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
1/8 in (3.2 mm) AC 115-175
1/8 in (3.2 mm) DC± 100-160
5/32 in (4.0 mm) AC 180-240
5/32 in (4.0 mm) DC± 160-215
3/16 in (4.8 mm) AC 240-300
3/16 in (4.8 mm) DC± 220-280
7/32 in (5.6 mm) AC 300-380
7/32 in (5.6 mm) DC± 270-340
1/4 in (6.4 mm) AC 340-440
1/4 in (6.4 mm) DC± 320-400

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.