Menu Close
Lincoln ER70S-2 or ER70S-6 mild steel TIG Wires

Diameters / Packaging

Diameters
 (3) 10 lb Tube
1/8 in (3.2 mm) ED034900
1/16 in (1.6 mm) ED034898
3/32 in (2.4 mm) ED034899

Lincoln® AK-10® TIG (GTAW) Cut Lengths

TIG (GTAW) | ED034900

CLASSIFICATIONS:
ER100S-G

Lincoln® AK-10™ from Lincoln Electric is suitable for use where consumables with less than 1% Ni are required.

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Package

Select Package

  • (3) 10 lb Tube

DETAILS

Suitable for use where consumables with less than 1% Ni are required.

Features

  • Capable of producing welds with 690 MPa (100 ksi) tensile strength
  • Suitable for use where consumables with less than 1% Ni are required
  • Batch Managed Inventory

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.28 ER100S-G

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F)
ER100S-G Requirement 100% Ar DC- 690 (100) min.
Typical Result, As-welded 100% Ar DC- 630 (91) 750-870 (109-126) 29 177-261 (130-192)

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Ti %V %Zr %Total Cu
Typical Result 0.00 max. 0.09-0.12 0.27 1.50-1.54 0.45 0.92 0.007-0.009 0.001-0.004 0.58-0.62 0.00 max. 0.005 max. 0.001 max. 0.16-0.20