Submerged Arc Wire

Diameters / Packaging

Diameters
60 lb Coil
1/8 in (3.2 mm) ED011743
3/16 in (4.8 mm) ED011749
3/32 in (2.4 mm) ED011752
5/32 in (4.0 mm) ED011758
5/64 in (2.0 mm) ED011762

Lincolnweld® L-60 Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED011749

CLASSIFICATIONS:
EL12

Mild Steel Solid Electrode

DETAILS

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes

Features

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Service Information

Documentation

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EL12
AWS AWS A5.23 EL12
ISO ISO 14171-A S1
DB ISO 14171-S S1
MIL MIL-E-23765/4 MIL-EL12

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Total Cu
EL12 Requirement 0.04 - 0.14 0.25 - 0.60 0.030 max. 0.030 max. 0.10 max. 0.35 max.
S1 Requirement 0.05 - 0.15 0.35 - 0.60 0.025 max. 0.025 max. 0.15 max.
Typical Result 0.11 0.48 0.005 0.009 0.07 0.12