Menu Close
Ultracore stainless, flux-cored wire, plastic spool

Diameters / Packaging

Diameters
 10 lb Spool
 25 lb Spool
0.047 in (1.2 mm) ED033320 ED033321

Pipeliner® 81M Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED033321

CLASSIFICATIONS:
E81T1-GM
E81T1-M21A4-K11

Pipeliner® 81M from Lincoln Electric is designed for hot, fill and cap pass welding on up to X70 grade pipe.

Diameter

Select Diameter

  • 0.047 in (1.2 mm)

Package

Select Package

  • 10 lb Spool
  • 25 lb Spool

DETAILS

A gas-shielded, flux-cored wire designed for hot, fill and cap pass welding on up to X70 grade pipe.

Features

  • Consistent Arc – designed for optimal performance in automated pipe welding applications where a consistent arc length is critical
  • Flat Bead Shape

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-GM-H4
AWS AWS A5.36 E81T1-M21A4-K11-H4
CWB CSA W48 E551T1-M21A4-K11-H4, E81T1-GM-H4

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E81T1-GM-H4 Requirement 75-80% Ar, balance CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min.
E81T1-M21A4-K11-H4 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 490 (71) 570-620 (82-90) 25 89-155 (65-114)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E81T1-GM-H4 Requirement 75-80% Ar, balance CO2 DC+ Info. Only 0.30 min. * 0.50 min. * 0.20 min. * 0.50 min. * 0.030 max. 0.030 max. 1.00 max. 0.10 min. * 4.0 max.
E81T1-M21A4-K11-H4 Requirement M21-ArC DC+ 0.15 max. 0.20 max. 1.00 - 2.50 0.50 max. 0.40 - 1.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.0064-0.007 0.06-0.07 0.05 max. 1.51-1.72 0.02 0.77-0.87 0.015 max. 0.014 max. 0.32-0.39 0.01 2.1-3

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.2 mm (0.047 in) 75-85% Ar / balance CO2 DC+ 19 (3/4) 4.4-10.2 (175 - 400) 23-30 130 - 275 1.8-4.1 (3.9-9.0)

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements.