Diameters / Packaging
|
Diameters |
(3) 8 lb Easy Open Can |
10 lb (4.5 kg) Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | EL55125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | EL55093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | EL55156634 |
DETAILS
TECH-ROD® 55 produces moderately hard welds and require carbide tipped tools for machining, readily used for welding of ductile, pliable cast irons and to repair castings.
Features
- The welds are moderately hard and require carbide tipped tools for machining
- A preheat and inter-pass temperature of not less than 350°F (177°C) is required during welding to prevent cracking
- Q2 Lot® - certificates showing actual deposit composition available online
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.15 | ENiFe-CI |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %S | %Si | %Ni+Co |
|---|---|---|---|---|---|---|---|---|
| ENiFe-CI Requirement | 1.0 max. | 2.0 max. | 2.5 max. | Remainder | 2.5 max. | 0.03 max. | 4.0 max. | 45 - 60 |
| Typical Result | 0.5 | 1.3 | 1.1 | 46 | 0.4 | 0.00 | 1.0 | 50 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |