Menu Close
UltraCore, 50 LB coil

Diameters / Packaging

Diameters
 50 lb Coil
3/32 in (2.4 mm) ED035770

UltraCore® 80Ni1M Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED035770

CLASSIFICATIONS:
E80T1-Ni1M-JH8
E80T1-M21A4-Ni1-H8

UltraCore® 80Ni1C from Lincoln Electric has high deposition in the flat and horizontal positions.

Diameter

Select Diameter

  • 3/32 in (2.4 mm)

Package

Select Package

  • 50 lb Coil

DETAILS

High deposition in the flat and horizontal positions.

Features

  • High deposition in the flat and horizontal positions
  • Excellent operator appeal and slag detachability
  • Designed for welding with 75-80% Argon / balance CO2
  • ProTech® foil bag packaging

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E80T1-Ni1M-JH8 Requirement 75-80% Ar, balance CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E80T1-M21A4-Ni1-H8 Requirement M21-ArC DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 75% Ar, 25% CO2 DC+ 550-600 (80-87) 620-660 (89-96) 25-28 66-122 (48-90) 28-92 (21-68)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E80T1-Ni1M-JH8 Requirement 75-80% Ar, balance CO2 DC+ 0.12 max. 0.15 max. 1.50 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 8.0 max.
E80T1-M21A4-Ni1-H8 Requirement M21-ArC DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 8 max.
Typical Result 75% Ar, 25% CO2 DC+ 0.002-0.005 0.04-0.08 0.06 max. 1.26-1.36 0.01 max. 0.84-1.04 0.012 max. 0.012 max. 0.48-0.61 0.02 2-8

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
3/32 in (2.4 mm) 75% Ar / 25% CO2 DC+ 25 (1) 3.2 (125) 27-32 340 5.4 (11.9) 4.7 (10.3) 87 - 89
3/32 in (2.4 mm) 75% Ar / 25% CO2 DC+ 31 (1 1/4) 5.1 (200) 27-32 465 8.6 (19.0) 7.6 (16.7) 87 - 89
3/32 in (2.4 mm) 75% Ar / 25% CO2 DC+ 31 (1 1/4) 6.4 (250) 30-36 620 13.1 (28.8) 11.4 (25.1) 87 - 89

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.