DETAILS
LINCOREĀ® 30-S is developed for build-up on tractor rollers, trunnions, idlers and crane wheels before final overlay, and as a final surface for improved resistance, offers moderate impact on shafts, track rails and idlers hardfacing application with unlimited deposit layers and very high quality of weld metal.
Features
- Intended for build-up before final overlay, and as a final surface for metal-to-metal wear with moderate impact
- For automatic and semiautomatic operation on mild and low alloy steels
- Good resistance to cross checking
- Unlimited deposit thickness with proper preheat and interpass temperatures and procedures
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
MECHANICAL PROPERTIES
Flux | Classification | Number of layer | Hardness Rockwell C |
---|---|---|---|
Lincolnweld® 801® | Typical Result | 6 | 27 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Mn | %Mo | %Si |
---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.11 | 2.5 | 0.5 | 0.4 |
Lincolnweld® 801® | Typical Result | 0.11 | 2.5 | 0.5 | 0.4 |
Lincolnweld® 801® | Typical Result | 0.11 | 2.7 | 0.5 | 0.6 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
3/32 in (2.4 mm) | DC+ | 1.5 (60) | 26 | 220 |
3/32 in (2.4 mm) | DC+ | 3.0 (120) | 27 | 360 |
3/32 in (2.4 mm) | DC+ | 4.6 (180) | 28 | 500 |
1/8 in (3.2 mm) | DC+ | 1.3 (50) | 27 | 310 |
1/8 in (3.2 mm) | DC+ | 2.0 (80) | 28 | 450 |
1/8 in (3.2 mm) | DC+ | 2.8 (110) | 28 | 600 |