DETAILS
LINCORE® 40-S offers higher chromium, manganese and molybdenum compared to LINCORE® 35-S for good puddle control on circumferential hardfacing with recommended Lincoln weld® 801, 802, 860, and Lincoln weld® 880 standard flux for semiautomatic operations.
Features
- Designed for rebuilding heavy equipment undercarriages
- Deposit is machinable and hot forgeable and resists rolling and sliding metal-to-metal wear
- Use on carbon and low alloy steels for good puddle control on roundabout welding
- Limited to 4 layers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C⁽¹⁾ |
---|---|---|
Lincolnweld® 801® | Typical Result | 39-42 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Mo | %Si |
---|---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.12 | 3.30 | 2.75 | 0.85 | 0.50 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
1/8 in (3.2 mm) | DC+ | 1.7 (65) | 27 | 330 |
1/8 in (3.2 mm) | DC+ | 2.3 (90) | 28 | 425 |
1/8 in (3.2 mm) | DC+ | 3.0 (120) | 29 | 525 |
1/8 in (3.2 mm) | DC+ | 2.0 (80) | 29 | 345 |
1/8 in (3.2 mm) | DC+ | 2.8 (110) | 30 | 425 |
1/8 in (3.2 mm) | DC+ | 3.7 (145) | 31 | 500 |
1/8 in (3.2 mm) | DC+ | 2.5 (100) | 31 | 375 |
1/8 in (3.2 mm) | DC+ | 3.3 (130) | 32 | 435 |
1/8 in (3.2 mm) | DC+ | 4.6 (180) | 33 | 520 |
NOTES
Note |
---|
⁽¹⁾ 3 or more layers after 2 hour post weld heat treat |