DETAILS
LINCORE® 8620 designed to produce weld metal with lower hardness compared to Lincore® 20 to reduce the cost of mechanical treatment during rebuilding worn parts to be used with recommended Lincoln weld® 801, 802 and Lincoln weld® 860 standard flux for semiautomatic operations.
Features
- Metal-cored wire for build-up on worn rolls
- A little softer than Lincore® 20 for easier machining
Typical Applications
- Steel Industry
- Rolls
Welding Positions
- Flat/Horizontal
Special Features
- Used for 8620 type rolls
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
MECHANICAL PROPERTIES
Flux | Classification | Hardness Rockwell C |
---|---|---|
Lincolnweld® 801® | Typical Result | 16-20 |
DEPOSIT COMPOSITION
Flux | Classification | %C | %Cr | %Mn | %Mo | %Ni | %Si |
---|---|---|---|---|---|---|---|
Lincolnweld® 801® | Typical Result | 0.09 | 0.45 | 0.80 | 0.15 | 0.55 | 0.30 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|---|
1/8 in (3.2 mm) | DC+ | 1.5 (60) | 26 | 400 |
1/8 in (3.2 mm) | DC+ | 2.5 (100) | 28 | 550 |
1/8 in (3.2 mm) | DC+ | 3.6 (140) | 30 | 680 |