Diameters / Packaging

Diameters	10 lb Spool	25 lb Spool	33 lb Spool	50 lb Coil	500 lb Accu-Trak® Drum	600 lb Speed Feed® Reel
0.035 in (0.9 mm)	ED026804	ED026805
0.045 in (1.1 mm)		ED022659	ED030007	ED020844	ED027364
0.052 in (1.3 mm)		ED022660		ED020845
1/16 in (1.6 mm)		ED022661	ED030009	ED020846		ED020851

Outershield® 71M Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED027364

CLASSIFICATIONS:
E71T-9C-J
E71T-9M-J
E71T1-C1A4-CS1-H16
E71T1-M21A4-CS1-H16

Outershield® 71M from Lincoln Electric is an overall performer - from excellent feedability to good arc performance.

Lincoln Electric Business Partner?

DETAILS

An overall performer – from excellent feedability to good arc performance. No side cutters are required to restart, just break the wire off in your hands – it's that easy.

Features

Dual classified for both 100% CO2 and 75% Argon / 25% CO2 mixed gas
Charpy V-Notch impact toughness tested to -40°C (-40°F)
High travel speeds
Spray like transfer with minimal spatter
Rod based manufacturing for industry leading wire stiffness and feedability
Increased rigidity allows for easy manual break-off

Service Information

You May Also Need

Magnum® PRO 350 Welding Guns

K2652-2

50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7018 MR® Stick (SMAW) Electrode

ED028281

Drive roll kit (2R) 1.0-1.2 mm

KP1697-045C

Magnum® PRO Nozzle - 350A, Thread-on, Recess, 5/8 in (15.9 mm) ID

KP2742-1-62R

View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.20	E71T-1C-J, E71T-1C-JH16, E71T-1M-J, E71T-1M-JH16, E71T-9C-J, E71T-9C-JH16, E71T-9M-J, E71T-9M-JH16
AWS	AWS A5.36	E71T1-C1A4-CS1-H16, E71T1-M21A4-CS1-H16
ABS	ABS - Part 2	3YSA, 3YSA H15
BV	BV - Chapter 5	SA3YH
CWB	CSA W48	E491T1-C1A4-CS1-H16, E491T1-M21A4-CS1-H16, E491T-9J-H16, E491T-9MJ-H16
DNV-GL	DNV - 2.9	III YMS H10
LR	LR - Chapter 11	3YS H15
MIL	MIL-E-24403/1D	MIL-71T-1C, MIL-71T-1M

MECHANICAL PROPERTIES

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -20°C (0°F)	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)	Charpy V-Notch J (ft-lbs) @ -40°C (-40°F)
E71T-9C-JH16 Requirement	100% CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.			27 (20) min.
E71T-9M-JH16 Requirement	75-80% Ar, balance CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.			27 (20) min.
E71T1-C1A4-CS1-H16 Requirement	100% CO2	DC+	400 (58) min.	480-660 (70-95)	22 min.			27 (20) min.
E71T1-M21A4-CS1-H16 Requirement	M21-ArC	DC+	400 (58) min.	480-660 (70-95)	22 min.			27 (20) min.
Typical Result, As-welded	100% CO2	DC+	470 (68)	540-600 (78-87)	26	176-224 (130-165)	167-184 (123-136)	68-174 (50-128)
Typical Result, As-welded	75% Ar, 25% CO2	DC+	540 (78)	630-650 (91-94)	23	148-155 (109-114)	133-142 (98-105)	103-148 (76-109)

DEPOSIT COMPOSITION

Classification	Shielding Gas	Polarity	%B	%C	%Mn	%P	%S	%Si	Diffusible Hydrogen mL/100g Weld Metal
E71T-9C-JH16 Requirement	100% CO2	DC+		0.12 max.	1.75 max.	0.03 max.	0.03 max.	0.90 max.	16.0 max.
E71T-9M-JH16 Requirement	75-80% Ar, balance CO2	DC+		0.12 max.	1.75 max.	0.03 max.	0.03 max.	0.90 max.	16.0 max.
E71T1-C1A4-CS1-H16 Requirement	100% CO2	DC+		0.12 max.	1.75 max.	0.030 max.	0.030 max.	0.90 max.	16 max.
E71T1-M21A4-CS1-H16 Requirement	M21-ArC	DC+		0.12 max.	1.75 max.	0.030 max.	0.030 max.	0.90 max.	16 max.
Typical Result	100% CO2	DC+	0.0039-0.0053	0.05-0.07	1.15-1.36	0.014 max.	0.014 max.	0.31-0.41
Typical Result	75% Ar, 25% CO2	DC+	0.0049-0.0059	0.06-0.08	1.43-1.61	0.014 max.	0.014 max.	0.46-0.53	9.8

TYPICAL OPERATING PROCEDURES

Diameter	Shielding Gas⁽¹⁾	Polarity	CTWD mm (in.)⁽²⁾	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)	Deposition Rate kg/hr (lb/hr)	Efficiency %
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	5.1 (200)	20-23	95	1.3 (2.8)	1.1 (2.8)	85
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	21-24	115	1.6 (3.5)	1.4 (3.5)	85
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	22-25	130	1.9 (4.2)	1.6 (4.2)	86
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	23-26	150	2.2 (4.9)	1.9 (4.9)	86
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	10.2 (400)	24-27	160	2.6 (5.6)	2.2 (5.6)	86
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	12.7 (500)	26-29	185	3.2 (7.0)	2.7 (7.0)	86
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	15.2 (600)	28-31	200	3.8 (8.4)	3.3 (8.4)	86
0.035 in (0.9 mm)	100% CO2	DC+	19-25 (3/4-1)	17.8 (700)	30-33	215	4.4 (9.8)	3.8 (9.8)	86
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	5.1 (200)	23-26	165	2.1 (4.6)	1.8 (3.9)	83
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	24-27	190	2.6 (5.8)	2.2 (4.8)	84
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	25-28	220	3.1 (6.9)	2.6 (5.8)	84
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	26-29	245	3.7 (8.1)	3.1 (6.8)	84
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	10.2 (400)	26-29	265	4.2 (9.2)	3.5 (7.8)	84
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	12.7 (500)	28-31	295	5.2 (11.5)	4.4 (9.7)	84
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	15.2 (600)	30-33	315	6.3 (13.8)	5.3 (11.7)	85
0.045 in (1.1 mm)	100% CO2	DC+	19-25 (3/4-1)	17.8 (700)	32-35	325	7.3 (16.1)	6.2 (13.7)	85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	3.8 (150)	22-25	150	2.1 (4.7)	1.7 (3.8)	81
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	5.1 (200)	23-26	180	2.8 (6.2)	2.3 (5.1)	83
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	6.4 (250)	24-27	210	3.5 (7.7)	2.9 (6.5)	83
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	7.6 (300)	25-28	235	4.2 (9.3)	3.5 (7.8)	84
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	8.9 (350)	27-30	265	4.9 (10.8)	4.2 (9.1)	84
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	11.4 (450)	29-32	305	6.3 (13.9)	5.4 (11.8)	85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	12.7 (500)	30-33	325	7.0 (15.5)	6.0 (13.2)	85
0.052 in (1.3 mm)	100% CO2	DC+	19-25 (3/4-1)	15.2 (600)	33-36	360	8.4 (18.6)	7.2 (15.8)	85
1/16 in (1.6 mm)	100% CO2	DC+	19 (3/4)	3.2 (125)	23-26	205	2.5 (5.4)	2.0 (4.5)	82
1/16 in (1.6 mm)	100% CO2	DC+	19 (3/4)	3.8 (150)	24-27	225	3.0 (6.5)	2.4 (5.4)	82
1/16 in (1.6 mm)	100% CO2	DC+	19 (3/4)	5.1 (200)	25-28	260	4.0 (8.7)	3.3 (7.2)	83
1/16 in (1.6 mm)	100% CO2	DC+	19 (3/4)	6.4 (250)	26-29	295	4.9 (10.9)	4.1 (9.1)	83
1/16 in (1.6 mm)	100% CO2	DC+	19 (3/4)	7.6 (300)	28-31	330	5.9 (13.0)	5.0 (10.9)	84
1/16 in (1.6 mm)	100% CO2	DC+	25 (1)	10.2 (400)	30-33	395	7.9 (17.4)	6.6 (14.6)	84
1/16 in (1.6 mm)	100% CO2	DC+	25 (1)	12.7 (500)	33-36	445	9.9 (21.7)	8.3 (18.3)	84

NOTES

Note
⁽¹⁾ When welding under mixed gas, decrease voltage.
⁽²⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.