DETAILS
Cellulosic electrode specifically designed for pipeline welding
Features
- Light slag for minimal arc interference
- Deep penetration
- Clean, visible weld puddle
- Superior puddle control
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.5 | E7010-P1 |
ABS | AWS A5.5 | E7010-P1 |
CWB | CSA W48 | E4910-P1 |
MECHANICAL PROPERTIES
Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
---|---|---|---|---|
E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. |
Typical Result, As-welded | 430-490 (62-70) | 530-580 (76-85) | 22-29 | 27-96 (20-71) |
DEPOSIT COMPOSITION
Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
---|---|---|---|---|---|---|---|---|---|
E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. |
Typical Result | 0.08-0.16 | 0.01-0.04 | 0.43-0.53 | 0.26-0.33 | 0.01-0.04 | 0.01 | 0.01 max. | 0.06-0.18 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Current
Amps |
---|---|---|
1/8 in (3.2 mm) | DC+ | 75-130 |
5/32 in (4.0 mm) | DC+ | 90-185 |
3/16 in (4.8 mm) | DC+ | 140-225 |