Menu Cerrar
Jet-LH 78 MR E7018

Diámetros / Embalaje

Diámetros
mm 		(4) 5 lb Tube
1/8 x 14 in (3.2 x 350 mm) ED033518
3/32 x 14 in (2.4 x 350 mm) ED033517
5/32 x 14 in (4.0 x 350 mm) ED033519

Jet-LH® 78 MR®

Soldadura de Arco Metálico Protegido (SMAW) | ED033519

CLASIFICACIONES:
E7018 H4R

Jet-LH® 78 MR® desempeño de arco suave

Diámetro

Seleccionar diámetro

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 14 in (2.4 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquete

Desencadenar

  • (4) 5 lb Tube

Detalles

Mild steel and low hydrogen electrode designed to meet the H4R designation from AWS A5 - Retail Small Packaging (RSP). All RSP products carry AWS compliance. Unlike the standard products, RSP products have no other agencies approvals.

Características

  • Smooth arc performance
  • Legacy product specified in many old PQR
  • Legacy product mainly used in shipbuilding

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018 H4R

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E7018 H4R Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-470 (62-68) 520-570 (75-83) 27-30 130-313 (96-231)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received 1800F H2O - After 9 hrs at 80F/80%RH
E7018 H4R Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.3 max. 0.4 max.
Typical Result 0.05 0.03-0.06 0.89-1.19 0.01 0.02-0.04 0.011-0.013 0.007-0.011 0.20-0.30 0.01 0.96-1.31 2 0.1 0.2-0.3

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32" (2.4 mm) DC+ 65-100
3/32" (2.4 mm) AC 70-105
1/8" (3.2 mm) DC+ 110-160
1/8" (3.2 mm) AC 120-170
5/32" (4.0 mm) DC+ 130-200
5/32" (4.0 mm) AC 140-230

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.