Diámetros / Embalaje
|
Diámetros mm |
(3) 10 lb Tube |
|---|---|
| 3/32 in (2.4 mm) | ED034350 |
Detalles
A nickel-bearing electrode with 1/2% molybdenum.
Características
- A nickel-bearing electrode with 1/2% molybdenum
- Available as Batch Managed Inventory
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft•lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Ink jet printing identification on entire length of electrode
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER90S-G |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) |
|---|---|---|---|---|---|---|
| ER90S-G Requirement | Not Specified | DC+ | 620 (90) min. | |||
| Typical Result, As-welded | 100% Ar | DC- | 690 (100) | 790 (115) | 24 | 293-317 (216-234) |
WIRE COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|
| Typical Result | 0.10-0.13 | 0.03 | 1.77-1.84 | 0.50 | 0.85 | 0.008-0.011 | 0.003-0.004 | 0.23-0.24 | 0.09-0.17 |