Menu Cerrar
Techalloy Stainless TIG Cut Length Consumables

Diámetros / Embalaje

Diámetros
mm 		10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) TG55125638

Techalloy® 55 TIG

Soldadura de Arco Eléctrico con Tungsteno y Gas (GTAW) | TG55125638

CLASIFICACIONES:
Similar al AWS A5.14 : ENiFe-C I

TECHALLOY® 55 Tungsten Inert Gas Rod designed for welding of cast irons to other cast irons as well as for joining cast irons to mild steels and readily used for the repair of castings application.

Diámetro

Seleccionar diámetro

  • 1/8 in (3.2 mm)

Paquete

Desencadenar

  • 10 lb (4.5 kg) Plastic Tube

Detalles

TECHALLOY® 55 weld deposit has a moderate hardness and required carbide tipped tools machineability, preheat and interpass temperature is required on cast iron to minimize the potential for cracks during welding.

Características

  • The welds are moderately hard and require carbide tipped tools for machining
  • A preheat and inter-pass temperature of not less than 350°F (175°C) is required during welding on cast iron to minimize the potential for cracks
  • Q2 Lot® - certificates showing actual wire composition available online

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

WIRE COMPOSITION

Classification %C %Cu %Mn %Ni %S %Si %Al %Fe
Typical Result 0.0 0.1 0.7 54.0 0.0 0.1 0.1 44.5