Menu Cerrar
Techalloy Stainless Stick Electrode

Diámetros / Embalaje

Diámetros
mm 		8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) EL276125634
3/16 x 14 in (4.8 x 355 mm) EL276187634
3/32 x 12 in (2.4 x 305 mm) EL276093632
5/32 x 14 in (4.0 x 355 mm) EL276156634

Tech-Rod® 276

Soldadura de Arco Metálico Protegido (SMAW) | EL276125634

CLASIFICACIONES:
ENiCrMo-4

Tech-Rod® 276, ofrece una excelente resistencia a la corrosión por tensión, agrietamiento, picaduras y corrosión por rendija o por grietas (crevice corrosion)

Diámetro

Seleccionar diámetro

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/16 x 14 in (4.8 x 355 mm)
  • 3/32 x 12 in (2.4 x 305 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Paquete

Desencadenar

  • 10 lb (4.5 kg) Easy Open Can

Detalles

TECH-ROD® 276 provides excellent resistance to stress corrosion cracking and pitting and crevice corrosion due to the high molybdenum content. It can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding.

Características

  • Due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking and pitting and crevice corrosion
  • This low carbon, nickel-chromium-molybdenum tungsten alloy can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding
  • Q2 Lot® - certificates showing actual deposit composition available online

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.11 ENiCrMo-4

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
ENiCrMo-4 Requirement 690 (100) min. 25 min.
Typical Result, As-welded 739 (107) 46

DEPOSIT COMPOSITION

Classification %C %Co %Cr %Cu %Fe %Mn %Mo %Ni %P %S %Si %V %W
ENiCrMo-4 Requirement 0.02 max. 2.5 max. 14.5 - 16.5 0.50 max. 4.0 - 7.0 1.0 max. 15.0 - 17.0 Remainder 0.04 max. 0.03 max. 0.2 max. 0.35 max. 3.0 - 4.5
Typical Result 0.02 0.1 15.1 0.00 6.0 0.7 15.5 59 0.02 0.00 0.1 0.03 3.8

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
3/32" (2.4 mm) 65-85
1/8" (3.2 mm) 80-110
5/32" (4.0 mm) 100-140
3/16" (4.8 mm) 110-160