Diámetros/embalaje
|
Diámetros |
33 lb Spool |
|---|---|
| 1,6 mm (1/16 in) | MG718062667 |
DETALLES
Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
Características
- This alloy can be age hardened to higher strengths
- Used for welding alloys 718, 706 and X-751
- Mainly used for welding high strength aircraft components and liquid rocket components involving cryogenic temperatures
- Q2 Lot® - Certificate showing actual wire composition available online
Información de mantenimiento
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiFeCr-2 |
| CWB | AWS A5.14 | ERNiFeCr-2 |
WIRE COMPOSITION
| Classification | %Al | %B | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiFeCr-2 Requirement | 0.20 - 0.80 | 0.006 max. | 0.08 max. | 17.0 - 21.0 | 0.30 max. | Remainder | 0.35 max. | 2.80 - 3.30 | 0.015 max. | 0.015 max. | 0.35 max. | 0.65 - 1.15 | 4.75 - 5.50 | 50.0 - 55.0 |
| Typical Result | 0.50 | 0.005 | 0.06 | 17.5 | 0.02 | 20.2 | 0.06 | 3.04 | 0.003 max. | 0.003 max. | 0.04 | 0.93 | 5.11 | 52.5 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 150-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |