DETAILS
Mild steel stick electrode standard in the pipe welding industry for root pass
Features
- Deep arc penetration
- Light slag with minimal arc interference
- Excellent vertical and overhead capability
- Standard in the pipe welding industry
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
| ISO | ISO 2560-A | E 42 3 C 2 5 |
| ABS | AWS A5.1 | E6010 |
| CWB | CSA W48 | E4310 |
| DNV-GL | DNV - 2.9 | 3 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 430-480 (62-69) | 530-580 (76-85) | 23-31 | 51-122 (38-90) | 82-91 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.12-0.16 | 0.06 max. | 0.50-0.67 | 0.02 | 0.07 max. | 0.007-0.012 | 0.004-0.011 | 0.14-0.25 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 50-85 |
| 3/32 in (2.4 mm) | DC- | 50-85 |
| 1/8 in (3.2 mm) | DC+ | 75-135 |
| 1/8 in (3.2 mm) | DC- | 75-135 |
| 5/32 in (4.0 mm) | DC+ | 100-175 |
| 5/32 in (4.0 mm) | DC- | 100-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
| 3/16 in (4.8 mm) | DC- | – |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |