DETAILS
Non heat treatable Low Magnesium Manganese alloy used for 5454 base material especially in elevated temperature applications above 150 deg F / 65 deg C .
Features
- • Matching filler alloy for welding 5454 base alloys
- • Low magnesium content to closely match the base material chemistry
- • Moderate strength applications
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5554 |
WIRE COMPOSITION
| Classification | %Be | %Cr | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|---|
| ER5554 Requirement | 0.0003 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 2.4 - 3.0 | 0.50 - 1.0 | 0.25 max. | 0.05 - 0.20 | 0.25 max. |
| Typical Result | 0.0002 max. | 0.08 | 0.01 | 0.13 | 2.6 | 0.7 | 0.06 | 0.09 | 0.00 |