Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
1/8 x 12 in (3.2 x 300 mm) ED033099
3/32 x 12 in (2.4 x 300 mm) ED033098

Excalibur® 309/309L-15 Stick (SMAW) Electrode

Stick (SMAW) | ED033099

AWS:
AWS A5.4 : E309-15
AWS A5.4 : E309L-15

EXCALIBUR® 309/309L-15 is designed with low carbon levels to help eliminate carbide precipitation, typical application on Dissimilar joints between stainless steels (Stainless)

Diamètre

Sélectionnez le diamètre

  • 1/8 x 12 in (3.2 x 300 mm)
  • 3/32 x 12 in (2.4 x 300 mm)

Paquet

Sélectionnez un forfait

  • 8 lb (3.6 kg) Easy Open Can
Acheter maintenant

Détails

EXCALIBUR® 309/309L-15 provides a low carbon weld deposit to help eliminate carbide precipitation. The fast freezing flux coating is great for vertical down welding.

Traits

  • Fast freezing slag is great for vertical down welding
  • Designed with low carbon levels to help eliminate carbide precipitation
  • Q2 Lot® - Certificate showing actual deposit composition and ferrite number (FN) by ferrite scope available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Red Line Traditional MIG Stick Welding Gloves

Gants de soudage à l’électrode MIG classiques

K2979-ALL
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Excalibur® 308/308L-17 Stick (SMAW) Electrode

ED033090
1 lb tube Excalibur 308/308L AC-DC

Excalibur® 308/308L-17 Stick (SMAW) Electrode

ED033093
Fleetweld 5P 14 Stick Electrode in 10 lb cans"

Excalibur® 308L-16 Stick (SMAW) Electrode

ED033080
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-15, E309L-15
ABS AWS A5.4 E309-15, E309L-15

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E309-15 Requirement 550 (80) min. 30 min.
E309L-15 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 470-500 (68-72) 620-640 (90-93) 31-38

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-15 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E309L-15 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001-0.002 0.02-0.03 22.6-23.7 0.03-0.10 0.7-1.0 0.02-0.21 0.09-0.15 13.3-13.6 0.02-0.03 0.01-0.02 0.94-1.00 2-10

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 60-70
1/8 in (3.2 mm) DC+ 90-100

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.