Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 (3) 8 lb Easy Open Can
 (3) 10 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED033944
3/32 x 12 in (2.4 x 300 mm) ED033943

Excalibur® 309/309L-16 N Stick (SMAW) Electrode

Stick (SMAW) | ED033943

AWS:
AWS A5.4 : E309-16
AWS A5.4 : E309L-16

Designed for joining stainless steel to mind or low alloy steel

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)

Paquet

Sélectionnez un forfait

  • (3) 8 lb Easy Open Can
Acheter maintenant

Détails

Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release

Traits

  • Q2 Lot® - certificate showing actual deposit chemistry and calculated ferrite number (FN) available online
  • Designed for joining stainless steel to mild or low alloy steel
  • Flux coating provides smooth arc transfer and slag is self-peeling for easy removal
  • Flux coating provides smooth arc transfer in all positions, except vertical down
  • Controlled compositon for meet nuclear requirements

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-16, E309L-16

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E309-16 Requirement 550 (80) min. 30 min.
E309L-16 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 440-470 (64-68) 570-600 (83-88) 34-43

DEPOSIT COMPOSITION

Classification %C %Co %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-16 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. Info. Only 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max. Info. Only
E309L-16 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. Info. Only 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max. Info. Only
Typical Result 0.03-0.04 0.04 23.5-24.1 0.04-0.09 1.5-1.8 0.08-0.19 0.07-0.10 13.2-13.4 0.02-0.03 0.01 max. 0.44-0.51 10-12

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32" (2.4 mm) DC+ 40-70
3/32" (2.4 mm) AC 40-70
1/8" (3.2 mm) DC+ 60-100
1/8" (3.2 mm) AC 60-100
5/32" (4.0 mm) DC+ 90-140
5/32" (4.0 mm) AC 90-140

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.