Détails
Specifically designed for vertical down welding of sheet metal and ornamental iron
Traits
- Good restrike characteristics
- Smooth and transfer and good wetting and low penetration
- Operates on low amperages
- High deposition rates
- Excellent operator appeal
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E7014 |
| ABS | AWS A5.1 | E7014 |
| BV | BV - Chapter 5 | 1 |
| CWB | CSA W48 | E4914 |
| DNV-GL | DNV - 2.9 | 1 |
| LR | LR - Chapter 11 | 1M |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E7014 Requirement | 400 (58) min. | 480 (70) min. | 17 min. | |
| Typical Result, As-welded | 410-470 (60-69) | 490-540 (71-78) | 18-29 | 27-83 (20-61) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Mn+Ni+Cr+Mo+V |
|---|---|---|---|---|---|---|---|---|---|---|
| E7014 Requirement | 0.15 max. | 0.20 max. | 1.25 max. | 0.30 max. | 0.30 max. | 0.035 max. | 0.035 max. | 0.90 max. | 0.08 max. | 1.50 max. |
| Typical Result | 0.05-0.08 | 0.02-0.04 | 0.44-0.67 | 0.01 max. | 0.01-0.04 | 0.010-0.018 | 0.007-0.012 | 0.16-0.47 | 0.01-0.02 | 0.49-0.74 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | AC | 80-100 |
| 3/32 in (2.4 mm) | DC± | 75-95 |
| 1/8 in (3.2 mm) | AC | 110-155 |
| 1/8 in (3.2 mm) | DC± | 100-145 |
| 5/32 in (4.0 mm) | AC | 150-225 |
| 5/32 in (4.0 mm) | DC± | 135-200 |
| 3/16 in (4.8 mm) | AC | 200-285 |
| 3/16 in (4.8 mm) | DC± | 185-235 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |