Détails
LINCOLN® ER316Si/316LSi provides higher silicon for increased puddle fluidity and better wetting at the toes of the weld, while the Molybdenum grade gives higher corrosion resistance.
Traits
- High silicon level for increased puddle fluidity and wetting out at the toes
- Molybdenum grade for increased corrosion resistance
- Solid rod with low carbon for welding stainless CrNiMo steels
- Ink jet printing identification on entire length of electrode
- Q2 Lot® Tested - A certificate showing actual wire composition and calculated ferrite number (FN) is available online
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER316LSi, ER316Si |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER316LSi Requirement | 0.03 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| ER316Si Requirement | 0.08 max. | 18.0 - 20.0 | 0.75 max. | 1.0 - 2.5 | 2.0 - 3.0 | Info. Only | Info. Only | 11.0 - 14.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| Typical Result | 0.01 | 18.2 | 0.08 | 1.6 | 2.3 | 0.07 | 0.01 | 11.3 | 0.02 | 0.01 | 0.76 | 9 | 7 |