Détails
LINCORE® 410 ideal for rebuilding caster rolls applications and provides optimal machineability with recommended Lincoln weld® 801, 802 and Lincoln weld® 860 standard fluxes for semiautomatic operations.
Traits
- Metal-cored wire with a 410 martensitic stainless steel deposit
- Low carbon content and high corrosion resistance
- Soft and easily machined
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Flux | Classification | Hardness Rockwell C |
|---|---|---|
| Lincolnweld® 801® | Typical Result | 27-32 |
DEPOSIT COMPOSITION
| Flux | Classification | %C | %Cr | %Mn | %Ni | %Si |
|---|---|---|---|---|---|---|
| Lincolnweld® 801® | Typical Result | 0.08 | 12.5 | 0.8 | 0.2 | 0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 1.7 (65) | 24 | 250 |
| 3/32 in (2.4 mm) | DC+ | 3.0 (120) | 28 | 375 |
| 3/32 in (2.4 mm) | DC+ | 4.4 (175) | 31 | 450 |
| 5/32 in (4.0 mm) | DC+ | 1.4 (55) | 27 | 475 |
| 5/32 in (4.0 mm) | DC+ | 2.2 (85) | 30 | 650 |
| 5/32 in (4.0 mm) | DC+ | 2.9 (115) | 32 | 800 |