Détails
Il est recommandé de passer au Pipeliner® Arc 80 pour un meilleur contrôle des flaques et une visibilité supérieure
Traits
- Laitier léger pour une interférence d'arc minimale
- Pénétration profonde
- Flaque de soudure propre et visible
- Contrôle supérieur des flaques
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| ISO | ISO 2560-A | E 46 4 1NiMo C 2 5 |
| ABS | AWS A5.5 | E8010-G |
| CWB | CSA W48 | E5510-G |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-G Requirement | 460 (67) min. | 550 (80) min. | 19 min. | |||
| Typical Result, As-welded | 470-570 (68-83) | 570-660 (83-96) | 20-26 | 57-89 (42-66) | 32-68 (24-50) | 87-95 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E8010-G Requirement | 0.30 min. * | 1.00 min. * | 0.20 min. * | 0.50 min. * | 0.03 max. | 0.03 max. | 0.80 min. * | 0.10 min. * | |||
| Typical Result | 0.13-0.17 | 0.13 max. | 0.06 max. | 0.55-0.95 | 0.10-0.42 | 0.010 max. | 0.63-0.81 | 0.01-0.02 | 0.01 max. | 0.06-0.16 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
NOTES
| Note |
|---|
| * To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements. |