Menu Close
SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
 16 lb Spool
 300 lb Gem-Pak® Box
3/64 in (1.2 mm) ED029573 ED034725

SuperGlaze® 5554

MIG (GMAW)

AWS:
AWS A5.10 : ER5554

SuperGlaze® 5554 is used for elevated temperature 150F / 65C service and as 5454 base material match

Diamètre

Sélectionnez le diamètre

  • 3/64 in (1.2 mm)

Paquet

Sélectionnez un forfait

  • 16 lb Spool
  • 300 lb Gem-Pak® Box
Acheter maintenant

Détails

SuperGlaze® 5554 Magnesium Manganese alloy used for elevated temperature 150F / 65C service and as 5454 base material match.

Traits

  • High temperature service of 150F degrees and higher such as some storage tanks applications
  • Matching filler alloy for welding 5454 base alloys
  • Low magnesium content to closely match base material chemistry
  • Moderate strength applications

Applications typiques

  • Transportation
  • Chemical tanks

Positions de soudage

  • All except vertical down

Gaz de protection

  • 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH

Caractéristiques spéciales

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

20 lb Plastic Spool SuperGlaze or SuperGlaze HD Aluminum MIG Wire

SuperGlaze® 5356 MIG

ED030282
20 lb Plastic Spool SuperGlaze or SuperGlaze HD Aluminum MIG Wire

SuperGlaze® 5183

EDS28437
20 lb Plastic Spool SuperGlaze or SuperGlaze HD Aluminum MIG Wire

Superglaze® 5556

EDS29581
SHADOW SPLIT LEATHER-SLEEVED JACKET

Shadow Split Leather Sleeved Welding Jacket - XLarge

K2986-XL

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5554

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cr %Cu %Fe %Mn %Si %Ti
ER5554 Requirement 0.0003 max. 2.4 - 3.0 0.25 max. 0.05 - 0.20 0.10 max. 0.40 max. 0.50 - 1.0 0.25 max. 0.05 - 0.20
Typical Result 0.0002 max. 2.6 0.00 0.08 0.01 0.13 0.7 0.06 0.09

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 19.6 (770) 21.6 185
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 12.7 (500) 23.0 210
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 9.1 (360) 24.8 280
2.4 mm (3/32") 100% Ar 85 (180) DC+ 19.0 (³/₄) 8.0 (315) 28.0 500
3.2 mm (1/8") 100% Ar 85 (180) DC+ 19.0 (³/₄) 5.1 (200) 30.3 535