Menu Close
Techalloy Stainless TIG Cut Length Consumables

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) TG208125638
1/16 in (1.6 mm) TG208062638
3/32 in (2.4 mm) TG208093638

Techalloy® 208 TIG (GTAW) Cut Lengths

TIG (GTAW) | TG208093638

AWS:
AWS ERNi-1

TECHALLOY® 208 Tungsten Inert Gas Rod designed for dissimilar joints between nickel alloys to stainless or ferritic steels application.

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Plastic Tube
Acheter maintenant

Détails

TECHALLOY® 208 is a high nickel alloy for MIG and TIG welding of nickel 200 and 201 with Al and Ti for sound deposits. Can be used for overlay on stainless or ferritic steel as well as repairing iron castings with aluminum and titanium sound deposit.

Traits

  • High nickel alloy with Al and Ti for sound deposits
  • Q2 Lot® - Certificate showing actual wire composition available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.14 ERNi-1
CWB AWS A5.14 ERNi-1

WIRE COMPOSITION

Classification %Al %C %Cu %Fe %Mn %P %S %Si %Ti %Ni+Co
ERNi-1 Requirement 1.5 max. 0.15 max. 0.25 max. 1.0 max. 1.0 max. 0.03 max. 0.015 max. 0.75 max. 2.0 - 3.5 93.0 min.
Typical Result 0.1 0.01 0.01 0.0 0.4 0.00 0.003 0.40 3.0 96.0