Diameters / Packaging
|
Diameters |
3 x 8 lb Easy Open Can |
10 lb (4.5 kg) Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | EL276125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | EL276093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | EL276156634 |
DETAILS
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Feature.Products.PDP.DetailsMain.Features
- Due to high molybdenum content, this alloy offers excellent resistance to stress corrosion cracking and pitting and crevice corrosion
- This low carbon, nickel-chromium-molybdenum tungsten alloy can also be used for dissimilar welding between nickel base alloys and stainless steels, as well as for surfacing and cladding
- Q2 Lot® - Certificate showing actual deposit composition available online
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrMo-4 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrMo-4 Requirement | 690 (100) min. | 25 min. |
| Typical Result, As-welded | 739 (107) | 46 |
DEPOSIT COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrMo-4 Requirement | 0.02 max. | 2.5 max. | 14.5 - 16.5 | 0.50 max. | 4.0 - 7.0 | 1.0 max. | 15.0 - 17.0 | Remainder | 0.04 max. | 0.03 max. | 0.2 max. | 0.35 max. | 3.0 - 4.5 |
| Typical Result | 0.02 | 0.1 | 15.1 | 0.00 | 6.0 | 0.7 | 15.5 | 59 | 0.02 | 0.00 | 0.1 | 0.03 | 3.8 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |
| 3/16" (4.8 mm) | 110-160 |