DETTAGLI
A low carbon, high manganese wire with nickel and molybdenum designed to weld high strength steels such as HY-80 and HSLA-80.
Caratteristiche
- A low carbon, high manganese wire with nickel and molybdenum designed to weld high strength steels such as HY-80 and HSLA-80
- Delivers yield strength greater than 690 MPa (100 ksi)
- Capable of producing welds with 690 MPa (100 ksi) tensile strength
- Prior to using this material for ASME Boiler and Pressure Vessel Code Section III applications, please contact the Lincoln Electric Specials Department to receive a Certified Material Test Report (CMTR) which meets all requirements of NCA-3860
Informazioni sui servizi
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina di ricerca SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER100S-1 |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) |
Hardness Rockwell C |
|---|---|---|---|---|---|---|---|
| ER100S-1 Requirement | I1 | DC- | 610 (88) min. | 690 (100) min. | 16 min. | ||
| Typical Result, As-welded | 100% Ar | DC- | 790 (114) | 830 (120) | 26 | 202-355 (149-262) | 26 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti | %V | %Zr | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER100S-1 Requirement | 0.10 max. | 0.08 max. | 0.30 max. | 1.25 - 1.80 | 0.25 - 0.55 | 1.40 - 2.10 | 0.010 max. | 0.010 max. | 0.20 - 0.55 | 0.10 max. | 0.05 max. | 0.10 max. | 0.25 max. |
| Typical Result | 0.00 max. | 0.05 | 0.04 | 1.67 | 0.42-0.43 | 1.88-1.93 | 0.005 | 0.005 | 0.43-0.49 | 0.04 | 0.003 max. | 0.00 max. | 0.14 |