Menu Chiudi
50 lb Can of Lincoln Electric Stick Electrodes

Diametri / imballo

Diametri
 Can 22,7 kg
3,2 x 350 mm (1/8 x 14 in) ED031611
4,0 x 350 mm (5/32 x 14 in) ED031612
5,0 x 350 mm (3/16 x 14 in) ED031613

Pipeliner® 7P+

Saldatura elettrodo rivestito (SMAW) | ED031613

CLASSIFICAZIONI:
E7010-P1
also meets E7010-G

Tubo cellulosico basso legato • AWS E7010-P1

Diametro

Selezionare diametro

  • 3,2 x 350 mm (1/8 x 14 in)
  • 4,0 x 350 mm (5/32 x 14 in)
  • 5,0 x 350 mm (3/16 x 14 in)

Imballo

Seleziona imballo

  • Can 22,7 kg

DETTAGLI

Progettato per la saldatura verticale discendente di tubi transnazionali e interni all’impianto

Caratteristiche

  • Saldatura in radice su tubi di grado fino a X80
  • Hot passes, passate di riempimento e passate di cap su tubi di grado fino a X65
  • Saldatura verticale discendente
  • Soddisfa lo standard NACE MR0175 per le applicazioni con gas acido
  • Dati del test disponibili per SSC (NACE TM0177)
  • Cellulosic electrode

Informazioni sui servizi

Documentazione

Potresti anche aver bisogno di

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029509
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029511
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031611
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031612

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina di ricerca SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-G, E7010-P1
ISO ISO 2560-A E 46 3 1Ni C 2 1
ABS AWS A5.5 E7010-P1
TUV AWS A5.5 E7010-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-79) 560-660 (81-95) 22-32 54-110 (40-81) 37-103 (27-76) 81-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 0.11-0.18 0.04 max. 0.50-0.88 0.07-0.20 0.010 max. 0.66-0.97 0.01 0.01 max. 0.10-0.40 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-130
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210