Diametri / imballo

Diametri	44 lb Spool	BOBINA 15 KG
0,9 mm (0,035 in)	EDS30778
1,1 mm (0,045 in)		ED031417

SuperArc® LA-100 MIG (GMAW) Wire

Saldatura MIG (GMAW) | ED031417

CLASSIFICAZIONI:
ER100S-G
ER110S-G

Mild Steel Solid Electrode

Partner di Lincoln Electric Business?

Accedi per visualizzare il tuo prezzo

DETTAGLI

Capable of producing welds with 690 MPa (100 ksi) tensile strength
Excellent for welding quenched and tempered steels and HY-80 base materials
Supports short-circuiting, globular, axial spray and pulsed spray transfer
Copper coating provides superior arc-starting characteristics for long contact tip life

Informazioni sui servizi

Potresti anche aver bisogno di

SuperArc® LA-100 MIG (GMAW) Wire

EDS30778

Punta di contatto Magnum® - Standard, 1,2 mm (0,45 pollici) - Confezione da 10

KP14-45

Kit rullini (2R) 1.1 mm

KP1696-045S

Guaina per cavi 0,9-1,2 mm (0,35-0,45 pollici) 4,6 m (15 piedi)

KP42-4045-15

Visualizza tutto

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina di ricerca SDS

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.28	ER100S-G, ER110S-G
ABS	ABS - Part 2	4YQ550SA
CWB	CWB AWS A5.28	ER69S-G (ER100S-G)
DB	ISO 16834-A	T 69 5 M21 Mn3Ni1,5Mo
MIL	MIL-E-23765/2E	MIL-100S-1
MIL	T9074-BC-GIB-010/0200	MIL-100S-1

MECHANICAL PROPERTIES

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -50°C (-60°F)
ER110S-G Requirement	Not Specified	Not Specified		760 (110) min.
Typical Result, As-welded	95% Ar, 5% CO2	DC+	700 (102)	770 (111)	21	153-175 (113-129)
Typical Result, As-welded	98% Ar, 2% O2	DC+	740 (107)	780-800 (113-116)	20	149-239 (110-176)

WIRE COMPOSITION

Classification	%Al	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%Ti	%V	%Zr	%Total Cu
ER110S-G Requirement			0.30 min. *		0.20 min. *	0.50 min. *
Typical Result	0.01	0.05-0.06	0.03-0.04	1.58-1.67	0.42-0.45	1.88-1.99	0.004-0.009	0.003-0.006	0.43-0.48	0.02-0.04	<0.005	<0.001	0.08-0.12

TYPICAL OPERATING PROCEDURES

Diameter	Transfer Mode	Shielding Gas	Polarity	CTWD mm (in.)⁽¹⁾	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)
0.035 in (0.9 mm)	Short Circuit Transfer	75% Ar / 25% CO2	DC+	9-12 (3/8-1/2)	2.5 (100)	18	80	0.7 (1.6)
0.035 in (0.9 mm)	Short Circuit Transfer	75% Ar / 25% CO2	DC+	9-12 (3/8-1/2)	3.8 (150)	19	120	1.1 (2.4)
0.035 in (0.9 mm)	Short Circuit Transfer	75% Ar / 25% CO2	DC+	9-12 (3/8-1/2)	6.4 (250)	22	175	1.8 (4.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	9-12 (3/8-1/2)	9.5 (375)	23	195	2.7 (6.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	9-12 (3/8-1/2)	12.7 (500)	29	230	3.6 (8.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	9-12 (3/8-1/2)	15.2 (600)	30	275	4.4 (9.6)
0.045 in (1.1 mm)	Pulsed Spray Transfer ⁽²⁾		DC+	12-19 (1/2-3/4)	5.1 (200)	19-21	130	2.4 (5.4)
0.045 in (1.1 mm)	Pulsed Spray Transfer ⁽²⁾		DC+	12-19 (1/2-3/4)	6.4 (250)	20-23	140	3.0 (6.7)
0.045 in (1.1 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-19 (1/2-3/4)	8.9 (350)	27	285	4.2 (9.2)
0.045 in (1.1 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-19 (1/2-3/4)	12.1 (475)	30	335	5.7 (12.5)
0.045 in (1.1 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-19 (1/2-3/4)	12.7 (500)	30	340	6.0 (13.2)
0.045 in (1.1 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-19 (1/2-3/4)	8.9 (350)	27	285	4.2 (9.2)
0.045 in (1.1 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-19 (1/2-3/4)	12.1 (475)	30	335	5.7 (12.5)
0.045 in (1.1 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-19 (1/2-3/4)	12.7 (500)	30	340	6.0 (13.2)
1/16 in (1.6 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-25 (1/2-1)	5.3 (210)	25	325	4.8 (10.7)
1/16 in (1.6 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-25 (1/2-1)	6.0 (235)	27	350	5.4 (12.0)
1/16 in (1.6 mm)	Spray Transfer	98% Ar / 2% O2	DC+	12-25 (1/2-1)	7.4 (290)	28	430	6.7 (14.8)
1/16 in (1.6 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-25 (1/2-1)	5.3 (210)	25	325	4.8 (10.7)
1/16 in (1.6 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-25 (1/2-1)	6.0 (235)	27	350	5.4 (12.0)
1/16 in (1.6 mm)	Spray Transfer	95% Ar / 5% CO2	DC+	12-25 (1/2-1)	7.4 (290)	28	430	6.7 (14.8)

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the eletrode must meet the minimum requirement for one or more of
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in (6.4 mm) to calculate Electrical Stickout.
⁽²⁾ Procedures in this area are for pulse MIG mode for welding in the vertical up and overhead welding positions. Actual results are dependent on joint, material thickness, as well as wave shape and pulse frequency.