Menu Close
Innershield/Outershield/Submerged Arc Wire

Diameters / Packaging

Diameters
 22.7 KG COIL
 25.4 KG COIL
 272 KG DRUM
2.4 mm ED012629
3/32 in (2.4 mm) ED012628
5/64 in (2.0 mm) ED014464

Innershield® NR®-311 Flux-Cored (FCAW-S) Wire

Flux-Cored Self-Shielded (FCAW-S) | ED012629

CLASSIFICATIONS:
A5.20/A5.36 : E70T-7

Innershield® NR®-311 from Lincoln Electric is designed for high deposition rates and fast travel speeds.

Diameter

Select Diameter

  • 2.4 mm
  • 3/32 in (2.4 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 22.7 KG COIL

DETAILS

Designed for high deposition rates and fast travel speeds. Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels in applications without impact strength requirements.

Features

  • High deposition rates and fast travel speeds
  • Easy slag removal
  • Optimal toe wash-in
  • Deep penetration
  • High resistance to cracking

Service Information

You May Also Need

Innershield/Outershield/Submerged Arc Wire

Innershield® NR®-152 Flux-Cored (FCAW-S) Wire

ED012186
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

Innershield® NR®-311 Flux-Cored (FCAW-S) Wire

ED012628
Drive Roll Kit, Cored Wire

Drive roll kit (4R) 2.4 mm - Cored and Solid wires

KP1505-3/32
Image not found

Gun Tube Assembly 82° 3/32 Wire

KP1907-2
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-7
AWS AWS A5.36 E70T7-AZ-CS3
ABS AWS A5.20 E70T-7
CWB CSA W48 E490T7-AZ-CS3 (E492T-7)

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E70T7-AZ-CS3 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC- 410 (59) 570-650 (83-94) 23

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E70T7-AZ-CS3 Requirement DC- 0.30 max. 1.75 max. 0.030 max. 0.030 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.21-0.30 0.42-0.49 0.014 0.005 0.08-0.13

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
5/64 in (2.0 mm) DC- 38 (1 1/2) 2.5 (100) 20-23 190 2.9 (6.4) 2.3 (5.0) 78
5/64 in (2.0 mm) DC- 38 (1 1/2) 4.1 (160) 24-28 275 4.7 (10.3) 3.6 (8.0) 78
5/64 in (2.0 mm) DC- 38 (1 1/2) 6.1 (240) 25-29 355 7.0 (15.4) 5.6 (12.4) 80
5/64 in (2.0 mm) DC- 38 (1 1/2) 7.6 (300) 27-31 410 8.8 (19.3) 7.2 (15.8) 82
3/32 in (2.4 mm) DC- 45 (1 3/4) 1.9 (75) 20-23 200 3.2 (7.0) 2.5 (5.4) 77
3/32 in (2.4 mm) DC- 45 (1 3/4) 3.4 (135) 23-26 300 5.9 (13.1) 4.6 (10.2) 78
3/32 in (2.4 mm) DC- 45 (1 3/4) 3.8 (150) 24-27 325 6.6 (14.6) 5.2 (11.4) 78
3/32 in (2.4 mm) DC- 45 (1 3/4) 5.3 (210) 26-28 400 9.3 (20.4) 7.5 (16.5) 81
3/32 in (2.4 mm) DC- 45 (1 3/4) 6.9 (270) 28-30 450 11.9 (26.2) 10.0 (22.0) 84
7/64 in (2.8 mm) DC- 45 (1 3/4) 2.5 (100) 23-26 325 5.4 (12.0) 4.5 (10.0) 83
7/64 in (2.8 mm) DC- 45 (1 3/4) 3.7 (145) 25-27 400 8.1 (17.8) 6.6 (14.5) 82
7/64 in (2.8 mm) DC- 45 (1 3/4) 4.4 (175) 26-28 450 9.8 (21.5) 8.2 (18.0) 83
7/64 in (2.8 mm) DC- 45 (1 3/4) 6.1 (240) 30-32 550 13.4 (29.5) 11.6 (25.5) 86
7/64 in (2.8 mm) DC- 45 (1 3/4) 7.6 (300) 32-34 625 16.7 (36.9) 15.0 (33.0) 89