DETAILS
Features
- Minimize surface silicates for exceptionally clean weld surface
- Reduced silicates for improved paint adhesion and increased corrosion resistance
- Microguard® Ultra surface treatment for consistent, stable arc performance with little to no weld spatter
- Optimized for use with Rapid X® LS mode to lower silicate island formation and spatter generation
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14341-A | G 42 3 M20 Z |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|---|---|
| G 42 3 M20 Z Requirement | M20 | Info. Only | 420 (61) min. | 500-640 (72-93) | 20 min. | 47 (35) min. |
| Typical Result, As-welded | 90% Ar, 10% CO2 | DC+ | 440 (64) | 530 (77) | 24 | 102-184 (75-136) |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu | %V | %Ti+Zr |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Typical Result | 0.02 | 0.07 | 0.02 | 1.68 | 0.00 max. | 0.27 | 0.004 | 0.004 | 0.05 | 0.17 | 0.01 | 0.09 |
TYPICAL OPERATING PROCEDURES
| Diameter | Transfer Mode | Shielding Gas | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|---|---|
| 1.2 mm (3/64") | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 19 (³/₄) | 3.8 (150) | 24 | 120 | 2.0 (4.5) |
| 1.2 mm (3/64") | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 19 (³/₄) | 8.9 (350) | 29 | 265 | 4.7 (10.3) |
| 1.2 mm (3/64") | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 19 (³/₄) | 14.0 (550) | 32 | 370 | 7.3 (16.2) |
| 1.2 mm (3/64") | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 19 (³/₄) | 3.8 (150) | 23 | 125 | 2.0 (4.5) |
| 1.2 mm (3/64") | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 19 (³/₄) | 8.9 (350) | 28 | 255 | 4.7 (10.4) |
| 1.2 mm (3/64") | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 19 (³/₄) | 14.0 (550) | 32 | 360 | 7.3 (16.0) |
| .040" (1.0 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 5.6 (220) | 23 | 105 | 2.1 (4.6) |
| .040" (1.0 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 8.9 (350) | 26 | 170 | 3.3 (7.3) |
| .040" (1.0 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 11.4 (450) | 28 | 210 | 4.2 (9.3) |
| .040" (1.0 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 15.2 (600) | 30 | 260 | 5.9 (13.1) |
| .040" (1.0 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 5.6 (220) | 22 | 105 | 2.2 (4.8) |
| .040" (1.0 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 8.9 (350) | 25 | 170 | 3.3 (7.3) |
| .040" (1.0 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 11.4 (450) | 27 | 210 | 4.2 (9.3) |
| .040" (1.0 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 15.2 (600) | 29 | 260 | 5.7 (12.6) |
| .035" (0.9 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 6.4 (250) | 23 | 100 | 1.9 (4.1) |
| .035" (0.9 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 8.9 (350) | 25 | 140 | 2.6 (5.8) |
| .035" (0.9 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 12.7 (500) | 27 | 180 | 3.9 (8.5) |
| .035" (0.9 mm) | Spray Transfer | 80% Ar, 20% CO2 | DC+ | 16 (⁵/₈) | 16.5 (650) | 29 | 220 | 5.1 (11.3) |
| .035" (0.9 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 6.4 (250) | 24 | 100 | 1.9 (4.2) |
| .035" (0.9 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 8.9 (350) | 26 | 140 | 2.6 (5.8) |
| .035" (0.9 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 12.7 (500) | 28 | 180 | 3.9 (8.5) |
| .035" (0.9 mm) | Spray Transfer | 90% Ar, 10% CO2 | DC+ | 16 (⁵/₈) | 16.5 (650) | 30 | 220 | 4.9 (10.9) |