Meniu Închidere
50 lb Can of Lincoln Electric Stick Electrodes

Diametre / Ambalaj

Diametre
 Can 22,7 kg
1/8 x 14 in (3.2 x 350 mm) ED031611
3/16 x 14 in (5.0 x 350 mm) ED031613
4.0x350 mm ED031612

Pipeliner® 7P+

Sudare sub strat de flux | ED031611

CLASIFICARI:
E7010-P1
also meets E7010-G

Slab aliat, celulozic, țevi • AWS E7010-P1

Diametru

Selectare diametru

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (5.0 x 350 mm)
  • 4.0x350 mm

Ambalaj

Selectare ambalaj

  • Can 22,7 kg

DETALII

Proiectat pentru sudare verticală descendentă a conductelor internaționale și în instalație

Caracteristici

  • Sudarea stratului de radacina a tevilor pana la grad X80
  • Trecerile calde, de umplere si suprainaltarea, pana la tevile grad X65
  • Sudare vertical descendenta
  • Indeplineste conditiile NACE MR0175 pentru aplicatiile "sour service"
  • Date de testare disponibile pentru testul SSC (NACE TM0177)
  • Electrod celulozic

Informații despre service

Documentație

S-ar putea să aveți nevoie și de

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029509
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031612
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031613

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-G, E7010-P1
ISO ISO 2560-A E 46 3 1Ni C 2 1
ABS AWS A5.5 E7010-P1
TUV AWS A5.5 E7010-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-79) 560-660 (81-95) 22-32 54-110 (40-81) 37-103 (27-76) 81-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 0.11-0.18 0.04 max. 0.50-0.88 0.07-0.20 0.010 max. 0.66-0.97 0.01 0.01 max. 0.10-0.40 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-130
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210