DETALII
5556A este folosita in mod uzual pentru sudarea materialelor de baza de inalta rezistenta, cum ar fi 5083 si ofera o rezistenta buna pe materiale de baza din tipul 6XXX. Elementele sunt controlate pentru a obtine o rezistenta mai mare a sudurii fata de aliajul 5356. Prezinta rezistenta ridicata la coroziune, facandu-l potrivit pentru aplicatii maritime. Ductilitate buna si rezistenta imbunatatita la fisurare.
Caracteristici
- Sarma inalt aliata cu Magneziu
- Elementele sunt contralate pentru a obtine o crestere a rezistentei peste a aliajului 5356
- Ductilitate buna si rezistenta imbunatatita la fisurare
- Rezistenta ridicata la coroziune in aplicatiile maritime.
Informații despre service
Documentație
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5556A |
WIRE COMPOSITION
| Classification | %Be | %Mg | %Zn | %Cr | %Cu | %Fe | %Mn | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|---|
| ER5556A Requirement | 0.0003 max. | 5.0 - 5.5 | 0.20 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 0.6 - 1.0 | 0.25 max. | 0.05 - 0.20 |
| Typical Result | 0.0002 max. | 5.1 | 0.00 | 0.08 | 0.00 | 0.11 | 0.6 | 0.05 | 0.09 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
| 2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
| 3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |