You can view the site in Turkish or English language. Visit Website

Menü Kapat
VPMD Packaging Lincoln

Çaplar / Paketleme

Çaplar
 VPMD 12 KG (6 x 2 KG, approx. 330 pcs)
 VPMD 13,2 KG (6 x 2,2 KG, approx. 120 pcs)
 VPMD 16,8 KG (6 x 2,8 KG, approx. 240 pcs)
3.2x350 mm CHROMET2X-32-2
4.0x450 mm CHROMET2X-40-2
5.0x450 mm CHROMET2X-50-2

CHROMET® 2X

Örtülü Elektrot (SMAW) | CHROMET2X-32-2

AWS:
AWS A5.5 : E9018-B3 H4R
EN ISO 3580-A : E CrMo2 B 3 2 H5
EN ISO 3580-B : E 6216-2C1M

Stick electrode CHROMET® 2X - 3.2x350 mm - VPMD 12 KG (approx. 330 pcs)

Çap

Çap Seçin

  • 3.2x350 mm
  • 4.0x450 mm
  • 5.0x450 mm

Paket

Paket Seç

  • VPMD 12 KG (6 x 2 KG, approx. 330 pcs)

DETAYLAR

Stick electrode – 2¼Cr-1Mo deposit which meets specific requirements for improved temper embrittlement resistance after prolonged service at 400-600°C

Özellikleri

  • 2¼Cr-1Mo deposit which meets specific requirements for improved embrittlement resistance after prolonged service at 400-600°C
  • Relevant trace elements (P, Sn, As, Sb) are controlled to ensure low Bruscato (X) and Watanabe (J) factors
  • Basic flux, metal powder type coatings on low carbon high purity core wire
  • Recovery is about 115%

Servis Bilgileri

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E9018-B3 H4R
ISO ISO 3580-A E CrMo2 B 3 2 H5
ISO ISO 3580-B E 6216-2C1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E9018-B3 H4R Requirement 530 (77) min. 620 (90) min. 17 min.
E CrMo2 B 3 2 H5 Requirement 400 (58) min. 500 (72) min. 18 min.
E 6216-2C1M Requirement 530 (77) min. 620 (90) min. 15 min.
Typical Result, Stress relieved 570 (83) 670 (97) 22

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %Total Cu
E9018-B3 H4R Requirement 0.05 - 0.12 2.00 - 2.50 0.90 max. 0.90 - 1.20 0.03 max. 0.03 max. 0.80 max.
E CrMo2 B 3 2 H5 Requirement 0.05 - 0.12 2.0 - 2.6 0.40 - 1.30 0.90 - 1.30 0.01 max. 0.3 max. 0.030 max. 0.025 max. 0.80 max. 0.3 max.
E 6216-2C1M Requirement 0.05 - 0.12 2.0 - 2.6 0.40 - 1.30 0.90 - 1.30 0.030 max. 0.025 max. 0.80 max.
Typical Result 0.06 2.2 0.70 1.05 0.00 0.0 0.010 0.012 0.25 0.1 max.

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240