Çaplar / Paketleme
|
Çaplar |
CAN 12.3 KG (3 x 4.1 KG, approx. 351 pcs) |
CAN 12.9 KG (3 x 4.3 KG, approx. 615 pcs) |
CAN 16.2 KG (3 x 5.4 KG, approx. 240 pcs) |
|---|---|---|---|
| 2.5x350 mm | CH9B9-25-1 | ||
| 3.2x350 mm | CH9B9-32-1 | ||
| 4.0x450 mm | CH9B9-40-1 |
DETAYLAR
Gelişmiş uzun süreli sürünme özelliklerine sahiptir. Eş değer (P91) 9CrMo çelikleri kaynaklayabilir
Özellikleri
- B9 (P91) alloyed steel: Modified 9CrMo designed to weld equivalent "type 91" 9CrMo steels modified with small additions of niobium, vanadium and nitrogen for improved long term creep resistance
- Moisture resistant coating provides low amounts of weld metal hydrogen levels for a superior weld
- Specifically designed for high integrity structural service at elevated temperature
- Weld metal chemistry is low in impurity elements allowing it to respect the X Factor (<15ppm) and J-factor (<120ppm)
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E9015-B91 H4 |
| ISO | ISO 3580-B | E 6216-9C1MV |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|---|
| E9015-B91 H4 Requirement | 530 (77) min. | 620 (90) min. | 17 min. |
| E 6216-9C1MV Requirement | 530 (77) min. | 620 (90) min. | 15 min. |
| Typical Result, Stress relieved | 590 (86) | 710 (103) | 22 |
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | %Total Cu | %V | %Mn+Ni |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E9015-B91 H4 Requirement | 0.04 max. | 0.08 - 0.13 | 8.0 - 10.5 | 1.20 max. | 0.85 - 1.20 | 0.02 - 0.07 | 0.02 - 0.10 | 0.80 max. | 0.01 max. | 0.01 max. | 0.30 max. | 0.25 max. | 0.15 - 0.30 | 1.40 max. |
| E 6216-9C1MV Requirement | 0.04 max. | 0.08 - 0.13 | 8.0 - 10.0 | 1.25 max. | 0.85 - 1.20 | 0.02 - 0.07 | 0.02 - 0.10 | 1.0 max. | 0.01 max. | 0.01 max. | 0.30 max. | 0.25 max. | 0.15 - 0.3 | 1.50 max. |
| Typical Result | 0.01 | 0.10 | 9.0 | 0.55 | 1.00 | 0.05 | 0.04 | 0.30 | 0.01 | 0.01 | 0.25 | 0.05 | 0.20 | 0.85 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 2.5 mm (3/32") | 70-110 |
| 3.2 mm (1/8") | 80-140 |
| 4.0 mm (5/32") | 100-180 |
| 5.0 mm | 140-240 |