DETAYLAR
Kök paso için boru kaynak endüstrisinde hafif çelik örtülü elektrot standardı
Özellikleri
- Yüksek operatör memnuniyeti ve kontrolü
- Kolay cüruf kalkışı
- Arazi ve tesis içi boru kaynağı
- Boru kaynağı endüstrisinde standart
Servis Bilgileri
Ayrıca İhtiyacınız Olabilir
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
| ISO | ISO 2560-A | E 42 3 C 2 5 |
| ABS | AWS A5.1 | E6010 |
| CWB | CSA W48 | E4310 |
| DNV-GL | DNV - 2.9 | 3 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | 430-480 (62-69) | 530-580 (76-85) | 23-31 | 51-122 (38-90) | 82-91 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.12-0.16 | 0.06 max. | 0.50-0.67 | 0.02 | 0.07 max. | 0.007-0.012 | 0.004-0.011 | 0.14-0.25 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 50-85 |
| 3/32 in (2.4 mm) | DC- | 50-85 |
| 1/8 in (3.2 mm) | DC+ | 75-135 |
| 1/8 in (3.2 mm) | DC- | 75-135 |
| 5/32 in (4.0 mm) | DC+ | 100-175 |
| 5/32 in (4.0 mm) | DC- | 100-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
| 3/16 in (4.8 mm) | DC- | – |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |