You can view the site in Turkish or English language. Visit Website

Menü Kapat
50 lb Can of Lincoln Electric Stick Electrodes

Çaplar / Paketleme

Çaplar
 Can 4,5 kg
 Can 22,7 kg
1/8 x 14 in (3.2 x 350 mm) ED033836 ED030917
2.5x350 mm ED030916
3/32 x 14 in (2.5 x 350 mm) ED033835
5/32 x 18 in (4.0 x 450 mm) ED030918

PIPELINER® 16P

Örtülü Elektrot (SMAW) | ED030916

AWS:
E7016-H4
E7016-1 H4

Alaşımsız çelik, Düşük Hidrojen • AWS E7016-1 H4

Çap

Çap Seçin

  • 1/8 x 14 in (3.2 x 350 mm)
  • 2.5x350 mm
  • 3/32 x 14 in (2.5 x 350 mm)
  • 5/32 x 18 in (4.0 x 450 mm)

Paket

Paket Seç

  • Can 22,7 kg

DETAYLAR

Düşük hidrojen için tasarlanmış yumuşak çelik örtülü elektrot, X60 sınıfı boru üzerinde dikey yukarı kapasite

Özellikleri

  • Q2 Lot® - Lot Kontrollü Kimyasal ve Mekanik Özellikler
  • Root pass X70 and up

Servis Bilgileri

Ayrıca İhtiyacınız Olabilir

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 16P

ED030917
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 16P Stick Electrode (SMAW)

ED030918
K875 Accessory Kit

Accessory Kit - 150 Amp

K875

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7016-1 H4, E7016-H4
ABS AWS A5.1 E7016-H4
CWB AWS A5.1M E4916-H4

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F)
E7016-1 H4 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 420-550 (61-79) 510-640 (74-93) 25-41 27-186 (20-137) 29-168 (22-124)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7016-1 H4 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 4 max. 0.6 max.
Typical Result 0.04-0.08 0.02-0.05 1.03-1.47 0.02 max. 0.01-0.04 0.008-0.014 0.003-0.012 0.32-0.57 0.02 max. 1.09-1.48 1-4 0.3 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
2.5 mm (3/32 in) DC± 55-105
2.5 mm (3/32 in) AC 60-115
3.2 mm (1/8 in) DC± 75-135
3.2 mm (1/8 in) AC 80-150
4.0 mm (5/32 in) DC± 120-170
4.0 mm (5/32 in) AC 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
DC- for root pass on pipe; DC± for general welding