Çaplar / Paketleme

Çaplar	44 lb Spool
1.0 mm	ED037829
1.2 mm	ED037556

SuperArc® XLS MIG (GMAW) Wire

MIG (GMAW) | ED037556

AWS:
AWS A5.18 : ER70S-9
EN ISO 14341-A : G 42 3 M20 Z

Mild Steel, Copper Coated MIG wire

DETAYLAR

Özellikleri

Minimize surface silicates for exceptionally clean weld surface
Reduced silicates for improved paint adhesion and increased corrosion resistance
Microguard® Ultra surface treatment for consistent, stable arc performance with little to no weld spatter
Optimized for use with Rapid X® LS mode to lower silicate island formation and spatter generation

Servis Bilgileri

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
ISO	ISO 14341-A	G 42 3 M20 Z

CONFORMANCES	SPECIFICATION	CLASSIFICATION
ISO	ISO 14341-A	G 42 3 M20 Z

MECHANICAL PROPERTIES

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)
G 42 3 M20 Z Requirement	M20	Info. Only	420 (61) min.	500-640 (72-93)	20 min.	47 (35) min.
Typical Result, As-welded	90% Ar, 10% CO2	DC+	440 (64)	530 (77)	24	102-184 (75-136)

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)
G 42 3 M20 Z Requirement	M20	Info. Only	420 (61) min.	500-640 (72-93)	20 min.	47 (35) min.
Typical Result, As-welded	90% Ar, 10% CO2	DC+	440 (64)	530 (77)	24	102-184 (75-136)

WIRE COMPOSITION

Classification	%Al	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%Total Cu	%V	%Ti+Zr
Typical Result	0.02	0.07	0.02	1.68	0.00 max.	0.27	0.004	0.004	0.05	0.17	0.01	0.09

Classification	%Al	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%Total Cu	%V	%Ti+Zr
Typical Result	0.02	0.07	0.02	1.68	0.00 max.	0.27	0.004	0.004	0.05	0.17	0.01	0.09

TYPICAL OPERATING PROCEDURES

Diameter	Transfer Mode	Shielding Gas	Polarity	CTWD mm (in.)	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	3.8 (150)	24	120	2.0 (4.5)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	8.9 (350)	29	265	4.7 (10.3)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	14.0 (550)	32	370	7.3 (16.2)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	3.8 (150)	23	125	2.0 (4.5)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	8.9 (350)	28	255	4.7 (10.4)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	14.0 (550)	32	360	7.3 (16.0)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	5.6 (220)	23	105	2.1 (4.6)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	8.9 (350)	26	170	3.3 (7.3)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	11.4 (450)	28	210	4.2 (9.3)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	15.2 (600)	30	260	5.9 (13.1)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	5.6 (220)	22	105	2.2 (4.8)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	8.9 (350)	25	170	3.3 (7.3)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	11.4 (450)	27	210	4.2 (9.3)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	15.2 (600)	29	260	5.7 (12.6)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	6.4 (250)	23	100	1.9 (4.1)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	8.9 (350)	25	140	2.6 (5.8)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	12.7 (500)	27	180	3.9 (8.5)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	16.5 (650)	29	220	5.1 (11.3)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	6.4 (250)	24	100	1.9 (4.2)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	8.9 (350)	26	140	2.6 (5.8)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	12.7 (500)	28	180	3.9 (8.5)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	16.5 (650)	30	220	4.9 (10.9)

Diameter	Transfer Mode	Shielding Gas	Polarity	CTWD mm (in.)	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	3.8 (150)	24	120	2.0 (4.5)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	8.9 (350)	29	265	4.7 (10.3)
1.2 mm (3/64")	Spray Transfer	80% Ar, 20% CO2	DC+	19 (³/₄)	14.0 (550)	32	370	7.3 (16.2)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	3.8 (150)	23	125	2.0 (4.5)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	8.9 (350)	28	255	4.7 (10.4)
1.2 mm (3/64")	Spray Transfer	90% Ar, 10% CO2	DC+	19 (³/₄)	14.0 (550)	32	360	7.3 (16.0)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	5.6 (220)	23	105	2.1 (4.6)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	8.9 (350)	26	170	3.3 (7.3)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	11.4 (450)	28	210	4.2 (9.3)
.040" (1.0 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	15.2 (600)	30	260	5.9 (13.1)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	5.6 (220)	22	105	2.2 (4.8)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	8.9 (350)	25	170	3.3 (7.3)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	11.4 (450)	27	210	4.2 (9.3)
.040" (1.0 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	15.2 (600)	29	260	5.7 (12.6)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	6.4 (250)	23	100	1.9 (4.1)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	8.9 (350)	25	140	2.6 (5.8)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	12.7 (500)	27	180	3.9 (8.5)
.035" (0.9 mm)	Spray Transfer	80% Ar, 20% CO2	DC+	16 (⁵/₈)	16.5 (650)	29	220	5.1 (11.3)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	6.4 (250)	24	100	1.9 (4.2)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	8.9 (350)	26	140	2.6 (5.8)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	12.7 (500)	28	180	3.9 (8.5)
.035" (0.9 mm)	Spray Transfer	90% Ar, 10% CO2	DC+	16 (⁵/₈)	16.5 (650)	30	220	4.9 (10.9)