Çaplar / Paketleme
|
Çaplar |
33 lb (15 kg) Steel Spool |
|---|---|
| 1/16 in (1.6 mm) | MG625062667 |
DETAYLAR
TECHALLOY® 625 is designed to match the composition and properties of alloy 625. The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments, with the high molybdenum content providing good stress, pitting and crevice corrosion resistance.
Özellikleri
- Designed to match the composition and properties of Alloy 627
- The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments
- The high molybdenum content provides good stress, pitting and crevice corrosion resistance
- Most popular nickel alloy for cladding
- Provides high temperature strength and structural stability
- Q2 Lot® - Certificate showing actual wire composition available online
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNiCrMo-3 |
| CWB | AWS A5.14 | ERNiCrMo-3 |
| MIL | MIL-E-21562E | EN625 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Ti | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERNiCrMo-3 Requirement | 0.40 max. | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 5.0 max. | 0.50 max. | 8.0 - 10.0 | 0.02 max. | 0.015 max. | 0.50 max. | 0.40 max. | 3.15 - 4.15 | 58.0 min. |
| Typical Result | 0.10 | 0.01 | 22.2 | 0.01 | 0.3 | 0.01 | 8.8 | 0.003 max. | 0.003 max. | 0.06 | 0.21 | 3.47 | 64.8 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 26-29 | 160-190 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 28-32 | 180-220 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |